I am trying to load the turns from my current game one by one into the game and thus load them into tracker by loading the turn after that. It seemed to be working well up through 30 days. I read up until turn 40 and it was ok until I saved and quit. When I tried to restart I am getting a memory error. I can go back and re-load the 30 turns and it works again.
What switch or other action do I need to take to eliminate this memory error?
Bump up each of the Xms and Xmx values by 64 or 128 increments. You can also add a -nomap parameter which frees up memory (but gets rid of the map function).
Posts: 183
Joined: 7/24/2013 From: North Carolina Status: offline
Im going to start with a big thank you for developing and supporting this great tool.
Ive read the last few pages of this thread but I could not figure out the definitive answer to if well see a Java 7 version or not in the future? If there is one in development, when will we be able to use it?
Thanks for all the effort you put in to this and the effort that already has been put into this wonderful tool.
< Message edited by robinsa -- 3/8/2014 11:21:16 AM >
Basically, to read a turn, you must be running Tracker with the same .dll that the turn was created with. So if you can figure that out it's a matter of copying in the right one at the right time and restarting Tracker each time you change .dll files.
My memory is not what it once was and so I figured that I would give this nifty little program a whirl. However, I am not having any luck getting it to run, and I have no clue what the problem is. Here is what I do know. I'm running windows 8.1 and java 6. ( I forget the version of java that I downloaded )
note: figured out my previous problem, but now I get this error:
D:\WITP Tracker>"C:\Program Files (x86)\Java\jre6\bin\java" -Xms512m -Xmx768m -j ar "WitPTracker.jar" WitP Tracker AE tables loaded in 1 seconds Exception in thread "AWT-EventQueue-0" java.lang.ArrayIndexOutOfBoundsException: 0 >= 0 at java.util.Vector.elementAt(Unknown Source) at witptracker.BasePanel$1.getValueAt(BasePanel.java:157) at witptracker.BasePanel$1.getColumnClass(BasePanel.java:233) at javax.swing.table.TableRowSorter.useToString(Unknown Source) at javax.swing.DefaultRowSorter.updateUseToString(Unknown Source) at javax.swing.DefaultRowSorter.sort(Unknown Source) at javax.swing.DefaultRowSorter.setRowFilter(Unknown Source) at witptracker.BasePanel.actionPerformed(BasePanel.java:1087) at javax.swing.JComboBox.fireActionEvent(Unknown Source) at javax.swing.JComboBox.contentsChanged(Unknown Source) at javax.swing.AbstractListModel.fireContentsChanged(Unknown Source) at javax.swing.DefaultComboBoxModel.setSelectedItem(Unknown Source) at javax.swing.DefaultComboBoxModel.addElement(Unknown Source) at javax.swing.JComboBox.addItem(Unknown Source) at witptracker.BasePanel.SetRegionList(BasePanel.java:1469) at witptracker.BasePanel.<init>(BasePanel.java:1029) at witptracker.GUIMain.CreateAndShowGUI(GUIMain.java:744) at witptracker.GUIMain$5.run(GUIMain.java:1020) at java.awt.event.InvocationEvent.dispatch(Unknown Source) at java.awt.EventQueue.dispatchEventImpl(Unknown Source) at java.awt.EventQueue.access$400(Unknown Source) at java.awt.EventQueue$2.run(Unknown Source) at java.awt.EventQueue$2.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source)
D:\WITP Tracker>pause Press any key to continue . . .
Please help! I'm also trying to learn how to play japan and I would really like to use the economy tool this program has!
< Message edited by Onyx -- 3/18/2014 12:44:03 AM >
Copy the pwsdll.dll from the game's Beta2 folder to the WitPTracker folder (replace what came with WitPTracker), remove the trackerdb files and try again.
Question - After changing game to newer Beta and upgrading tracker to most recent version it "behaves" differently. Certain messages I used to see no longer show up. I have gone to alerts and made sure all types were checked so they would show.
Examples: Ship repair - I used to get a message in my alerts when ships had finished repairing as much as they could - I.E. Repairs no longer possible messages regarding repair mode and type of damage left. I am no longer getting those messages. Task Forces - Not getting messages on when they arrive.(Land forces and air forces yes though) Not getting messages on getting buzzed/spotted by enemy search planes.
What did I goof up?
_____________________________
It is by caffeine alone I set my mind in motion, It is by the beans of Java that thoughts acquire speed, The hands acquire shaking, the shaking becomes a warning, It is by caffeine alone I set my mind in motion.
Posts: 92
Joined: 9/27/2007 From: San Diego, CA Status: offline
Floyd,
Any chance you could add pilot skills to Tracker? I don't want the history, just the latest turn value. (I suspect the DB would explode if you tracked all that history)
Assuming each skill requires 1 byte of storage, that would be 12 bytes per pilot.
I think there are 30,000 pilot slots, so that would mean 360,000 bytes = 351K additional DB size.
Is this doable? Could you also add those fields to the pilot .CSV download?
Thanks, Keith
< Message edited by Keifer -- 3/25/2014 6:37:26 AM >
After a couple of months of not-using tracker, I tried to clear it (it was already too heavy) and reinstalled it, foreseeing the need for a fresh restart for my new Pbem game. I installed it back... changed the dll file... done everything I think I remember from Damian's suggestions...
...and....
doesn't work
This time Java simply calls it out saying there's an error..Platform SE Binary stopped working... every time I try to launch tracker this message pops up...and the program never loads..
Ok...I tried to uninstall Java... I had upgraded to Java 7 cause I had some softwares for work that require Java 7... however I uninstalled it... and now...can't seem to find any Java 6 32 bit anywhere... Where in the world can I find the correct Java for Tracker?
Ok...I tried to uninstall Java... I had upgraded to Java 7 cause I had some softwares for work that require Java 7... however I uninstalled it... and now...can't seem to find any Java 6 32 bit anywhere... Where in the world can I find the correct Java for Tracker?
Ok...I tried to uninstall Java... I had upgraded to Java 7 cause I had some softwares for work that require Java 7... however I uninstalled it... and now...can't seem to find any Java 6 32 bit anywhere... Where in the world can I find the correct Java for Tracker?
This is information from the operationsreport.txt file, right?
I'm working on adding that now, but it's not there in any released version.
I know I am wrong but I swear I thought Tracker was showing me messages when ships can no longer get any more repairs. I.e. not just when a ship is finished repairing and returned but when ships in repair are not getting any more repairs because all non-critical has been repaired leaving irreparable damage points (in current mode).
_____________________________
It is by caffeine alone I set my mind in motion, It is by the beans of Java that thoughts acquire speed, The hands acquire shaking, the shaking becomes a warning, It is by caffeine alone I set my mind in motion.
Posts: 274
Joined: 12/4/2000 From: Michigan USA Status: offline
Just started a new beta game and installed the latest release of Tracker. Install went fine and turn loads, but I am getting no alert messages. ( the page is empty )
the dos screen does have a message that says a certain file has 1 days info but that 2 day turns are specified. ( I am playing 2 day turns 0
Just started a new beta game and installed the latest release of Tracker. Install went fine and turn loads, but I am getting no alert messages. ( the page is empty )
the dos screen does have a message that says a certain file has 1 days info but that 2 day turns are specified. ( I am playing 2 day turns 0
any ideas?
Mike
Alerts show up after you load a second turn (the alerts are derived by comparing one save with another), so you won't see alerts on initialization.
I also use java 7 for some work stuff, so I can't delete. ANy chance at all of tracker being made to work with 7?
Instructions on how to run Tracker with Java 6 while Java 7 is installed on the same machine for most stuff have been given several times in this thread.
C:\Mike\Tracker>C:\Program Files (x86)\Java\jre6\bin\java" -Xms512m -Xmx768m -ja r "WitPTracker.jar" nomap 'C:\Program' is not recognized as an internal or external command, operable program or batch file.
C:\Mike\Tracker>pause Press any key to continue . . .
An unplanned dynasty: Roger Neilson, Roger Neilson 11, Roger Neilson 3 previous posts 898+1515 + 1126 = 3539.....Finally completed my game which started the day WITP:AE was released
Posts: 1277
Joined: 4/12/2012 From: Bedlington, Northumberland, UK Status: offline
Thanks Witpqs, but that didn't solve it.... but it encouraged me to think a bit... and of course as I'd moved the game it needed to point to a different directory, and there were one or two other little errors....
Long time since I had to think about this, memory not what it was.
Running nicely now
Roger
< Message edited by Roger Neilson 3 -- 4/4/2014 6:29:19 AM >
_____________________________
An unplanned dynasty: Roger Neilson, Roger Neilson 11, Roger Neilson 3 previous posts 898+1515 + 1126 = 3539.....Finally completed my game which started the day WITP:AE was released