Trifler
Posts: 115
Joined: 5/7/2007
Status: offline
|
In an effort to combine the information scattered out there about the custom difficulty settings added with Allied Corps and the 1.20 patch of Panzer Corps/Afrika Corps, I'm writing this short guide. Unfortunately, I don't know if it's possible to make a table on this forum. If someone knows a way, please let me know and I'll update this post to use it. For now I'll do the best I can. I have also posted this on the Slitherine forum.
To set a custom difficulty, you can either do so at the start of a new game, or you can do so between missions. This also means that you can change the difficulty over the course of the game if you wish. When you see the difficulty screen, you'll notice that there is now and Advanced tab. Clicking on it takes you to the custom difficulty options.
As of the 1.21 patch, the sliders automatically adjust to whatever difficulty was selected on the Basic tab (Sergeant, etc.) and become independent of the other tab once the Custom Difficulty checkbox has been checked. This allows the player to see what settings are used by each difficulty setting.
Currently there are no tooltips so I'll describe what each setting does. Some are straightforward and some are not, but I'll cover them all.
Custom Difficulty - You have to check this box in order for any of the sliders to override the difficulty setting selected on the Basic tab. However, the Advanced Options listed below will work either way.
Player Prestige - This slider affects how much prestige you earn. Note that if you set this to 0%, you will literally never earn a single prestige point (game breaker).
AI Prestige - This slider affects how much prestige the AI earns, or maybe just how much it starts each mission with. I'm not sure if the AI can earn prestige or not. As above, if you set this to 0% the AI will have no prestige to work with. I'm not sure if that would break the game, but certainly the AI would not be able to reinforce damaged units, etc.
Player Experience - This slider affects how much experience your units earn. At 0% your units will remain at 0-stars forever and you'll never be able to use overstrength.
AI Experience - This slider affects how much experience the AI's units earn.
Player Strength - This slider modifies the default strength of your units, as shown by the number over each unit on the map. Overstrength always goes up to five higher than what this is set to.
AI Strength - This slider modifies the default strength of the AI's units, as shown by the number over each unit on the map. Overstrength always goes up to five higher than what this is set to.
Number of turns - This slider modifies the number of turns you have available to complete each mission. The number in parenthesis is the actual number of turns added or subtracted.
AI Level - I wasn't able to find a detailed description of each setting, but Sergeant and Lieutenant difficulties use 0, Colonel uses 1, and the higher difficulties use 2. AI Level 2 is basically the best AI the developers have been able to create. On 0 the enemies tend to not move much in combat. They just hold their positions, for the most part. That doesn't count moving towards scripted objectives, of course. Level 1 sees enemies actively position themselves in combat to try and surround your units. AI units will move to support nearby AI units. AI air units seem much better at staying in groups. The AI's fighters will cover their bombers, whereas on level 0 they seem to each do their own thing. I haven't played on level 2 so I can't really say anything about it other than it's obviously going to be more challenging than level 1. In heavily scripted scenarios, the effect of AI Level is not as noticeable since the AI has to follow the script.
Game Rules - If you're new to the game, then this setting is probably irrelevant to you and you'll just stick with 1.20. If you've been playing since Panzer Corps came out, then you're probably used to the rules from 1.14 and earlier. The 1.20 rule set changes the following:
Prestige soft cap
Class-specific experience effects:
- AT gets +2 Hard Attack per 100 xp
- Fighters get +2 Air Attack per 100 xp
- AA guns get +2 Air Attack per 100 xp
Forcing enemy units to surrender earns you prestige
Overstrength is progressively more expensive with every point applied
Initiative heroes are limited to +1 bonus
Entrenchment gives a defense bonus of 2x the entrenchment level against ranged attacks
Close terrain now gives +4 defense bonus to ground units vs. fighter and tactical bomber attack
Overstrength is lost after upgrade
Replacements come suppressed
Train transportation takes 2 turns instead of 3
The prestige soft cap means that your units earn prestige as normal up to a certain amount. What this amount is depends on the mission, with subsequent missions in a campaign having a higher number. This slows down the rate at which players can potentially accumulate prestige and generally help keep things balanced over the course of a campaign. As a "soft" cap, you will still earn some prestige after reaching the cap, but only a small fraction of normal.
With the bonus damage per star (1 star = 100 xp), the smaller AT and AA guns become far more effective. Since most of the smaller versions can move further each turn, the damage bonus makes them worthy of additional consideration.
With the 1.14 rule set, overstrength cost the same amount of prestige per point, and the cost varied depending on the purchase cost of the unit. With the 1.20 rule set, the cost of raising overstrength from 12 to 13 is far higher than the cost of raising it from 10 to 11. In addition, upgrading between families returns a unit to 10 strength if it was overstrength. Upgrading within the same series/family doesn't reset the unit's strength. This means that with 1.20 you want to upgrade and then add overstrength, whereas with 1.14 you would want to add overstrength before upgrading.
Combat Random (Chance):
Normal - There is a chance that the prediction is considerably off and you are either lucky or unlucky. The possible deviation could be as high as 100%.
Limited - There is a chance that the prediction is somewhat off, but not by more than 20%.
None - Everything happens as predicted. Random chance only occurs with Rugged Defense.
Reform Units - This is a cheat that has now been given a place in the UI. If one of your units is destroyed, it will return to your unit reserve with zero strength. You then have until the end of the scenario to reinforce it back up to at least 1 strength so it will carry over into the next scenario. This will preserve the unit's heroes and history list, but it will still lose all of its experience.
So that's all good information, but it would really help if we had something to relate it to. So now I'm going to write the settings that are used for each of the basic difficulty settings. This information comes straight from the diff.pzdat file in the Panzer Corps/Data folder. It's also visible within the game as of 1.21.
Sergeant
Player Prestige: 200%
Player Experience: 200%
Player Strength: 0
AI Prestige: 50%
AI Experience: 50%
AI Strength: -5
Turns: +5
AI Level: 0
Lieutenant
Player Prestige: 150%
Player Experience: 100%
Player Strength: 0
AI Prestige: 80%
AI Experience: 80%
AI Strength: 0
Turns: 0
AI Level: 0
Colonel
Player Prestige: 100%
Player Experience: 100%
Player Strength: 0
AI Prestige: 100%
AI Experience: 100%
AI Strength: 0
Turns: 0
AI Level: 1
General
Player Prestige: 100%
Player Experience: 100%
Player Strength: 0
AI Prestige: 150%
AI Experience: 100%
AI Strength: 0
Turns: 0
AI Level: 2
Field Marshal
Player Prestige: 100%
Player Experience: 50%
Player Strength: 0
AI Prestige: 150%
AI Experience: 100%
AI Strength: 0
Turns: 0
AI Level: 2
I'll leave out the unlockable difficulties for now, but I can add them if someone requests it.
I thank the developers for adding these custom difficulty settings. Now for example, if a player finds Sergeant too easy/simple and Lieutenant too much of a jump, one can do something like use the Sergeant settings with an AI Level of 1, or whatever the player wants. You can even change the difficulty settings between missions, so if you get stuck on one, you can lower the settings for that mission and turn them back up again afterwards.
< Message edited by Trifler -- 7/6/2014 6:47:32 AM >
|
Printable Version
Custom Difficulty Settings - 
RE: Custom Difficulty Settings - 
RE: Custom Difficulty Settings - 
New Messages
No New Messages
Hot Topic w/ New Messages
Hot Topic w/o New Messages
Locked w/ New Messages
Locked w/o New Messages
Post New Thread