Matrix Games Forums

Forums  Register  Login  Photo Gallery  Member List  Search  Calendars  FAQ 

My Profile  Inbox  Address Book  My Subscription  My Forums  Log Out

Understanding Supply

 
View related threads: (in this forum | in all forums)

Logged in as: Guest
Users viewing this topic: none
  Printable Version
All Forums >> [New Releases from Matrix Games] >> Strategic Command Series >> Strategic Command: World War I >> Understanding Supply Page: [1]
Login
Message << Older Topic   Newer Topic >>
Understanding Supply - 12/13/2020 9:15:58 PM   
mdsmall

 

Posts: 461
Joined: 4/28/2020
From: Vancouver, BC
Status: offline
I am re-posting in this Forum my conclusions from a long-running thread in the War in Europe Forum under the same heading. The following post represents my own attempt to explain the rules governing supply and supply connections in way that takes into account all of the changes made in patches to the game, including version 1.03. These notes also reflect clarifications to the supply rules offered by Hubert and Bill in this Forum and the War in Europe Forum. Both Hubert and Bill have reviewed these notes and have given them their thumb's up.

I do not try to cover all the effects of supply in these notes, or other aspects of the rules (such as production and reinforcement of units) which are interspersed in the Game Manual with the supply rules. I have tried to spell out some of the implications of the supply rules that are not fully explained in the Game Manual and have included a few explanatory comments that I think might help players. I have tried to avoid using some terminology from the Manual that I found confusing (such as the distinction between resources and Key Resources) and in some places have used my own terms in lower case that I think help explain the meaning of the rules.

I have tried to adjust these notes to reflect the few differences in the supply rules between SC War in Europe and SC WW1. However, there may be some differences that I have missed (it has been a couple of months since I played the WW1 game). I would be grateful for corrections and comments from readers in this Forum.

Best regards,

Michael


< Message edited by mdsmall -- 12/14/2020 5:36:50 PM >
Post #: 1
RE: Understanding Supply - 12/13/2020 9:21:03 PM   
Tanaka


Posts: 4378
Joined: 4/8/2003
From: USA
Status: offline

quote:

ORIGINAL: mdsmall

I am re-posting in this Forum my conclusions from a long-running thread in the War in Europe Forum under the same heading. The following post represents my own attempt to explain the rules governing supply and supply connections in way that takes into account all of the changes made in patches to the game, including version 1.03. These notes also reflect clarifications to the supply rules offered by Hubert and Bill in this Forum and the War in Europe Forum. Both Hubert and Bill have reviewed these notes and have given them their thumb's up.

I do not try to cover all the effects of supply in these notes, or other aspects of the rules (such as production and reinforcement of units) which are interspersed in the Game Manual with the supply rules. I have tried to spell out some of the implications of the supply rules that are not fully explained in the Game Manual and have included a few explanatory comments that I think might help players. I have tried to avoid using some terminology from the Manual that I found confusing (such as the distinction between resources and Key Resources) and in some places have used my own terms in lower case that I think help explain the meaning of the rules.

I have adjusted these notes to reflect the very few differences in the supply rules between SC War in Europe and SC WW1. However, if I have overlooked something, please note it here so I can make the necessary correction. I hope readers will find these useful.

Best regards,

Michael


I think you forgot to post the notes?

_____________________________


(in reply to mdsmall)
Post #: 2
RE: Understanding Supply - 12/13/2020 9:32:33 PM   
mdsmall

 

Posts: 461
Joined: 4/28/2020
From: Vancouver, BC
Status: offline
Notes on Supply Sources and Supply Connections (updated to reflect changes in version 1.03)

General

1. Supply is a fundamental factor in the game. Supply affects units' combat effectiveness, Action Points, capacity for Operational Movement, reinforcement levels, vulnerability to desertion and attrition, as well as the cost to National Morale if they are destroyed and the cost in MPPs if they are then rebuilt. The supply levels of towns, cities and ports determines where units can be built and up to what level they can be reinforced and if units can use Operational movement though them.

2. Land, air and naval units all need supply. Most of the following rules apply specifically to land units. For the differences in the rules rules governing supply for air and naval units, see the relevant section below.

3. Supply for both players is calculated at the end of each turn. You can check the supply potentially available to your land units in every hex at the start of your turn by pressing the S key. If you press the S key again, it will recalculate what your supply would be in each hex next turn, taking into account any moves you have made so far and any automatic increases in the level of friendly supply sources.

4. Land units have three potential sources of supply: urban resource hexes; ports; or HQ units. Often land units can trace a supply line to more than one of these sources. A unit's supply level is determined by the highest value supply source which it can reach through a line of supply.

5. A line of supply is a line of contiguous friendly controlled hexes between a unit and a supply source. Enemy zones of control do not cut supply lines, but enemy controlled hexes do.

6. Each supply source has a supply range which depends on its current supply level and the number of Action Points required to move from the source to the units being supplied. Terrain costs thus can reduce the supply available to land units. If a supply line can be traced over a road hexside, it will negate the terrain effects of that hex (unless it is an unpaved road in Mud conditions).

7. An urban resource, a port or a HQ can supply an unlimited number of friendly land units within supply range. (There are different rules for air units - see below).

Supply from Urban Resources

8. The following are the maximum supply levels available from the following friendly controlled urban resources:

a) Major Capitals and Major Cities: 12
b) Cities, Fortresses and Fortified Towns: 10 (with some exceptions, see below)
c) Towns and Settlements: 8

Note that Cities in the Ottoman Empire and Serbia (namely Belgrade) have the same maximum supply value as towns, i.e 8.

9. Urban resources that have been captured from the enemy have their maximum supply levels reduced by an Occupational Efficiency factor. In the default campaign, this factor is set at 80% for most countries. This gives the following maximums for occupied urban resources:

a) Major Cities: 10
b) Cities, Fortresses and Fortified Towns: 8
c) Towns and Settlements: 6

The exceptions to the above are in Serbia, Montenegro, Albania and Greece, where the Occupational Efficiency factor in the default campaign is set at 100%. In these countries, there will be no reduction in the supply levels of their urban resources if occupied. Note that Syria, Palestine, Arabia and Mesopotamia all start the game as Ottoman occupied territories, so the occupational efficiency factor applies to their towns and Capitals connected by rail back to Constantinople, giving them a maximum supply value of 6.

10. An urban resource will only provide its maximum supply if it is connected by an unbroken line of friendly controlled rail hexes of any length to one of the following: a friendly Major's Capital, Industrial Center or Primary Supply Center. The rail line cannot pass through any urban resources with a supply level of less than 5.

11. The supply level available from any urban resource will be reduced to a maximum of 5 if any of the following conditions apply:

a) if it can trace a supply line over friendly controlled land hexes but not by rail to a friendly Major's Capital, Industrial Center or Primary Supply Center;
b) if it can only trace a supply line (by rail or land) to a Secondary Supply Center;
c) if it can only trace a supply line (by rail or land) to a Minor Capital;

12. If an urban resource is completely cut off by land from any of the above supply sources, its maximum supply level will be 3. This can happen if it is cut off from a supply source by enemy controlled or neutral hexes or by water hexes.

13. If the factors reducing the maximum supply of an urban resource no longer apply (e.g. if it has a rail link to a friendly Major Capital restored) the resource will increase its supply by 1 point a turn until it reaches its maximum. (This is the same rate as an urban resource will recover from attrition due to adjacent enemy units, combat damage or scorched earth effects).

Supply from Ports

14. Ports can also provide supply to land units. Since land units cannot occupy port hexes, a port's supply range starts from the friendly controlled land hexes adjacent to the port (which usually, but not always, includes an urban resource). Thus, a level 10 port provides level 10 supply to units in the adjacent land hexes, diminishing to zero over its supply range, just like an urban resource.

15. Port hexes provide supply to land units up to their maximum level provided that a supply line can be traced by rail from the port hex to a friendly Major Capital, Industrial Center or Primary Supply Center. The maximum level for Major Ports with such a rail connection is 12 and for regular Ports it is 10.

16. Major Ports and regular Ports that do not have a connection by rail to one the above friendly Major supply sources have their maximum level reduced to 5. (This is the reason why ports in Scandinavia, on islands in the Mediterranean, in North Africa, the Middle East and Canada all start the game at level 5).

17. Ports that have had their maximum level reduced by adjacent enemy units, combat damage or scorched earth will recover at the same rate as urban resources i.e. 1 point per turn.

18. Occupied ports will have their port levels reduced by the same Occupational Efficiency factor that applies to Urban Resources in that country.

19. The presence of an enemy naval or land unit adjacent to a port will block all supply to friendly land units from that port.

Supply from HQs

20. HQ units are also a source of supply. HQs take the supply they receive from their nearest supply source and then distribute it at a higher level to other units in their supply range. This supply distribution feature of HQs makes them especially valuable when your units are operating at or beyond the range of supply from friendly urban resources or ports.

21: You can see these two different supply values for an HQ if you click on it. The HQ's incoming supply level is listed first, followed in brackets by its supply distribution level. Thus, if a HQ unit has a supply of "5 (8)", its incoming supply is 5 and the supply it distributes is 8.

22. The maximum supply that a HQ distributes to other units depends on the strength of the HQ and its incoming supply. Full strength HQs distribute supply according to the following scale:

Incoming supply: 0 Distributed supply: 3
Incoming supply: 1 or 2 Distributed supply: 5
Incoming supply: 3 or 4 Distributed supply: 6
Incoming supply: 5 Distributed supply: 8
Incoming supply 6 up Distributed supply: 10

23. Under certain conditions, one HQ can boost the supply distributed by a second HQ that is within its supply range. Only two HQs can be linked this way to form a supply chain. Within a chain, the HQ with the lower command rating boosts the supply distributed by the higher rated HQ. (If you click on the HQ receiving a boost, the HQ providing the boost will be highlighted in yellow.) Supply boosting between two HQs applies:

a) If the first HQ has an incoming supply of 1 or 2 and the second HQ has an incoming supply of less than 3, then the second HQ will have its supply boosted to 5(6).

b) If the first HQ has an incoming supply 3 or more and the second HQ has an incoming supply of less than 5, then the second HQ will have its supply boosted to 5(8).

24. HQs increase the minimum level of supply they distribute with each increment of Logistics tech, regardless of their incoming supply or their strength. Thus, a HQ with Level 5 in Logistics Tech will always distribute at least level 5 supply to other units, even at partial strength and with an incoming supply of zero.

Supply for Air Units

25. Air units can receive supply from urban resources and ports just like land units. However, to receive supply from a HQ, an air unit must be attached to it. Air units which are not attached to a HQ that is in range are indicated by a red hatch beneath the unit. Air units which could receive a higher level of supply if attached to a different HQ in range are indicated by a purple hatch beneath the unit. Unattached air units, especially in low supply areas, can find themselves much less effective in combat than attached air units.

Supply for Naval Units

26. Naval supply is calculated differently from supply for land or air units. Naval units can only receive supply from friendly ports. Unlike land or air units, the amount of supply received by naval units does not depend on the strength of the port - a naval unit will be resupplied to level 10 by ending its turn on any friendly port. Ports can project supply to naval units at sea for a supply range of 10, with the value of the supply received diminishing by 1 for each hex distance from the port. If naval units move out of range of a friendly port their supply levels will not drop, except for Amphibious Transports which will have their supply reduced by 1 point for each turn that they are at sea. However, naval units will have their supply reduced by 1 point per turn if they move using naval cruise or they raid a convoy route. They will also lose 1 supply point per combat they engage in, whether in attack or defense.

Supply for Amphibious Landings

27. All units (except HQs) making an Amphibious landing disembark at the current supply level +1 of their respective Transports. HQs disembark with an incoming supply level of 5 plus their current Amphibious Warfare tech level. After their first turn ashore, all units (except HQs and Marines) must find a local source of supply or their supply will drop to zero. If they are disembarked with a HQ, it can serve as a friendly supply source for up to 5 turns, at a diminishing rate of 2 supply points per turn. Marines also retain their own supply after disembarking, at a diminishing rate of at 2 supply points per turn.

< Message edited by mdsmall -- 12/14/2020 5:35:14 PM >

(in reply to mdsmall)
Post #: 3
RE: Understanding Supply - 12/14/2020 12:06:51 AM   
OldCrowBalthazor


Posts: 1108
Joined: 7/2/2020
From: Republic of Cascadia
Status: offline
mdsmall

Thanks for this concise guide! (I made a copy as a desk side reference)

I read your ongoing work and collaboration with Bill over on the WiE forum with great interest and its great that you posted it here.

(in reply to mdsmall)
Post #: 4
RE: Understanding Supply - 12/14/2020 2:00:50 AM   
Tanaka


Posts: 4378
Joined: 4/8/2003
From: USA
Status: offline
Very nice thanks for this great work!

_____________________________


(in reply to OldCrowBalthazor)
Post #: 5
RE: Understanding Supply - 12/19/2020 1:54:30 AM   
Tanaka


Posts: 4378
Joined: 4/8/2003
From: USA
Status: offline

quote:

ORIGINAL: mdsmall
25. Air units can receive supply from urban resources and ports just like land units. However, to receive supply from a HQ, an air unit must be attached to it. Air units which are not attached to a HQ that is in range are indicated by a red hatch beneath the unit. Air units which could receive a higher level of supply if attached to a different HQ in range are indicated by a purple hatch beneath the unit. Unattached air units, especially in low supply areas, can find themselves much less effective in combat than attached air units.


Why is Air Supply different from Land Supply? Distance from the HQ does not affect land units but it affects air units? Why? No wonder the AI puts its air units on the front line to be destroyed...

_____________________________


(in reply to mdsmall)
Post #: 6
RE: Understanding Supply - 12/19/2020 2:11:22 AM   
mdsmall

 

Posts: 461
Joined: 4/28/2020
From: Vancouver, BC
Status: offline
Hi Tanaka - distance from a HQ affects the supply to land units, just as it does air units. The supply drops off for each AP it takes to move between a unit and its nearest supply source. Bill and Hubert are better placed to explain why they required air units to be attached to HQs in order to be in full supply. From my point of view, it makes HQs even more important, especially in the WWII game where air power is a significant factor in combat. I can't comment on why the AI behaves the way that it does - in the WW1 game in particular, I have noticed that the AI tends to be careless about protecting units behind the front line units like aircraft, HQs and artillery from flanking attacks by the enemy.

< Message edited by mdsmall -- 12/19/2020 2:12:58 AM >

(in reply to Tanaka)
Post #: 7
RE: Understanding Supply - 12/19/2020 2:54:28 AM   
Tanaka


Posts: 4378
Joined: 4/8/2003
From: USA
Status: offline
quote:

ORIGINAL: mdsmall

Hi Tanaka - distance from a HQ affects the supply to land units, just as it does air units. The supply drops off for each AP it takes to move between a unit and its nearest supply source. Bill and Hubert are better placed to explain why they required air units to be attached to HQs in order to be in full supply. From my point of view, it makes HQs even more important, especially in the WWII game where air power is a significant factor in combat. I can't comment on why the AI behaves the way that it does - in the WW1 game in particular, I have noticed that the AI tends to be careless about protecting units behind the front line units like aircraft, HQs and artillery from flanking attacks by the enemy.


Then why the different colors for air units with HQ's but not land units?

_____________________________


(in reply to mdsmall)
Post #: 8
RE: Understanding Supply - 12/19/2020 4:32:38 AM   
OldCrowBalthazor


Posts: 1108
Joined: 7/2/2020
From: Republic of Cascadia
Status: offline

quote:

ORIGINAL: Tanaka

quote:

ORIGINAL: mdsmall

Hi Tanaka - distance from a HQ affects the supply to land units, just as it does air units. The supply drops off for each AP it takes to move between a unit and its nearest supply source. Bill and Hubert are better placed to explain why they required air units to be attached to HQs in order to be in full supply. From my point of view, it makes HQs even more important, especially in the WWII game where air power is a significant factor in combat. I can't comment on why the AI behaves the way that it does - in the WW1 game in particular, I have noticed that the AI tends to be careless about protecting units behind the front line units like aircraft, HQs and artillery from flanking attacks by the enemy.




Yeah, those flaws as you described with the AI are unfortunate, because otherwise on the whole its really pretty good and has surprised me at times. I just do pbem now but do hot seat tests to try out new ideas and the like and seen the AI adopt its self in a workman like manner more than not.

As for the comment on the value of Hq's..yes in WiE its of paramount importance, especially when getting the fullest use of aircraft, and that goes for artillery in this game also.

(in reply to Tanaka)
Post #: 9
RE: Understanding Supply - 12/19/2020 4:54:50 AM   
mdsmall

 

Posts: 461
Joined: 4/28/2020
From: Vancouver, BC
Status: offline

quote:

ORIGINAL: Tanaka

Then why the different colors for air units with HQ's but not land units?


The colours are there to remind you to check the HQ attachments for your air units, as it is affecting their supply. Since HQ attachments do not affect the supply for land units, there is not the same need to point out which of your land units are unattached.

Once I understood what the colours meant, I found them quite helpful, especially the red hatching. The only problem is that if you see one of your air units is starting the turn with red hatching underneath, attaching it to a nearby HQ will not change its supply level for that turn - it only gives you a head's up to fix the problem before the start of your next turn.

(in reply to Tanaka)
Post #: 10
RE: Understanding Supply - 12/19/2020 6:31:09 AM   
Tanaka


Posts: 4378
Joined: 4/8/2003
From: USA
Status: offline
quote:

ORIGINAL: mdsmall


quote:

ORIGINAL: Tanaka

Then why the different colors for air units with HQ's but not land units?


The colours are there to remind you to check the HQ attachments for your air units, as it is affecting their supply. Since HQ attachments do not affect the supply for land units, there is not the same need to point out which of your land units are unattached.

Once I understood what the colours meant, I found them quite helpful, especially the red hatching. The only problem is that if you see one of your air units is starting the turn with red hatching underneath, attaching it to a nearby HQ will not change its supply level for that turn - it only gives you a head's up to fix the problem before the start of your next turn.


Wait what? HQ does not affect supply for land units? You just said distance from an HQ affects the supply of land and air units? Still trying to understand the difference here?

_____________________________


(in reply to mdsmall)
Post #: 11
RE: Understanding Supply - 12/19/2020 6:58:00 AM   
mdsmall

 

Posts: 461
Joined: 4/28/2020
From: Vancouver, BC
Status: offline
Hi, let me try to explain it this way. HQs have two different functions: a command function and a supply function. Under the first, they provide combat benefits to units that are attached to them ie units in their command range. Under the second, they provide supply to units that are in their supply range. The two ranges are different: command range has a base level of 5 (increasing with command and control tech) and the benefits do not vary with a unit's distance from a HQ. Supply range depends on the supply distribution level of the HQ (see paras 20 - 24 in my notes above) and it does diminish with distance from the HQ.

In the case of land units, these two functions of HQs are completely separate. A land unit can obtain supply from an HQ it is not attached to; and it can be commanded by a HQ that is not providing it with supply. It can even obtain supply from an HQ when it is unattached to any HQ. In other words, a HQ can potentially supply many more land units than it can command.

In the case of air units, these two functions are linked: if an air unit is not attached to a HQ using the command function, it can not be supplied from that HQ. The purple hatches indicate that there is another HQ within command range of the air unit which could provide a higher level of supply if the air unit's command attachment was changed to that HQ (using the Auto-assist or Manual keys). The red hatches indicate that the air unit is not currently attached to any HQ, so it can not be drawing supply from any HQ that is within supply range.

Hope this helps.

(in reply to Tanaka)
Post #: 12
RE: Understanding Supply - 12/19/2020 7:41:04 AM   
Willard


Posts: 125
Joined: 2/7/2004
From: Up the Nung river past Do Lung bridge...
Status: offline
This is a very useful thread, thanks for posting!

Does anyone have any illustrative screenshots of the points listed above? Have to finish my current game (still haven't patched yet), but once that is done and I patch, I will keep a note to try to screenshot any of the above scenarios.

(in reply to mdsmall)
Post #: 13
RE: Understanding Supply - 12/19/2020 6:45:18 PM   
Tanaka


Posts: 4378
Joined: 4/8/2003
From: USA
Status: offline

quote:

ORIGINAL: mdsmall

Hi, let me try to explain it this way. HQs have two different functions: a command function and a supply function. Under the first, they provide combat benefits to units that are attached to them ie units in their command range. Under the second, they provide supply to units that are in their supply range. The two ranges are different: command range has a base level of 5 (increasing with command and control tech) and the benefits do not vary with a unit's distance from a HQ. Supply range depends on the supply distribution level of the HQ (see paras 20 - 24 in my notes above) and it does diminish with distance from the HQ.

In the case of land units, these two functions of HQs are completely separate. A land unit can obtain supply from an HQ it is not attached to; and it can be commanded by a HQ that is not providing it with supply. It can even obtain supply from an HQ when it is unattached to any HQ. In other words, a HQ can potentially supply many more land units than it can command.

In the case of air units, these two functions are linked: if an air unit is not attached to a HQ using the command function, it can not be supplied from that HQ. The purple hatches indicate that there is another HQ within command range of the air unit which could provide a higher level of supply if the air unit's command attachment was changed to that HQ (using the Auto-assist or Manual keys). The red hatches indicate that the air unit is not currently attached to any HQ, so it can not be drawing supply from any HQ that is within supply range.

Hope this helps.


Thank you that is more clear I understand now!

_____________________________


(in reply to mdsmall)
Post #: 14
RE: Understanding Supply - 12/21/2020 2:52:25 PM   
Hubert Cater

 

Posts: 5199
Joined: 7/22/2013
Status: offline
Thanks for posting this here as well Michael

_____________________________


(in reply to Tanaka)
Post #: 15
Page:   [1]
All Forums >> [New Releases from Matrix Games] >> Strategic Command Series >> Strategic Command: World War I >> Understanding Supply Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts


Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

0.875