BioEd Installation and COW.Reg Issue (Full Version)

All Forums >> [Current Games From Matrix.] >> [World War II] >> Norm Koger's The Operational Art Of War III >> TOAW III Support



Message

ralphtricky -> BioEd Installation and COW.Reg Issue (3/2/2007 5:01:46 PM)

If you don't have TOAW COW installed and want to use BioEd...

The COW Reg file inserts that value into the registry to point the graphics directory for BioEd to the TOAW III directory.

The COW.REG file should be created with Notepad and will create a registry entry

It should actually read...

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Software\TalonSoft\The Operational Art of War, CW]
"game_path"="C:\\Matrix Games\\The Operational Art of War III"

Apologies,
Ralph



hueglin -> RE: BioEd Installation and COW.Reg Issue (3/2/2007 6:33:09 PM)

quote:

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Software\TalonSoft\The Operational Art of War, CW]
"game_path"="C:\\Matrix Games\\The Operational Art of War III"


A Note: I could only get it to work properly if you added \graphics (as suggested by Ralph) so that the reg file reads:

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Software\TalonSoft\The Operational Art of War, CW]
"game_path"="C:\\Matrix Games\\The Operational Art of War III\graphics"



Jeff Norton -> RE: BioEd Installation and COW.Reg Issue (3/14/2007 7:52:36 PM)

Hi Ralph and hueglin,

I've tried to get BioEd to work with these changes, but when I load the v104acow.exe, I get a set of 20+ small 20+ windows saying

..\Graphics\xxxxxxx.bmp inside a small window labled File Not Found

Any ideas?



ralphtricky -> RE: BioEd Installation and COW.Reg Issue (3/15/2007 8:03:29 AM)

quote:

ORIGINAL: Jeff Norton

Hi Ralph and hueglin,

I've tried to get BioEd to work with these changes, but when I load the v104acow.exe, I get a set of 20+ small 20+ windows saying

..\Graphics\xxxxxxx.bmp inside a small window labled File Not Found

Any ideas?

The value in the registry for the directory doens't match the directory it's looking for.

RUn regedit and make sure that the following registry key is installed, and that's where TOAW III is installed..

HKEY_CURRENT_USER\Software\TalonSoft\The Operational Art of War, CW]
"game_path"="C:\Matrix Games\The Operational Art of War III"

EDITED:Removed the double-slashes, they're only required when creating at the export file.



Jeff Norton -> RE: BioEd Installation and COW.Reg Issue (3/15/2007 9:12:56 PM)

Hi Ralph,

Yep, its there. Is the double-slashes needed, seeing its not the normal format for MS networking references?

I checked the format, and, checked the location path - it mirrors what the registry link installed. Still, no dice.

Ideas?

-Jeff

PS - we can take this to the Hotmail email, if you like....



ralphtricky -> RE: BioEd Installation and COW.Reg Issue (3/15/2007 9:48:59 PM)

quote:

ORIGINAL: Jeff Norton

Hi Ralph,

Yep, its there. Is the double-slashes needed, seeing its not the normal format for MS networking references?

I checked the format, and, checked the location path - it mirrors what the registry link installed. Still, no dice.

Ideas?

-Jeff

PS - we can take this to the Hotmail email, if you like....

Let's leave it here for now, it may help other people.

The double-slashes are actually a 'C' thing. The \ is a special character in C, so you need two to create one. Looking at this again, they're created when I use regedit to export the file. When using regedit to view the key, you should only see one \.

Can you either go into regedit and make sure there's only one slash, or open the zip file, and double-click on the .reg file inside to import it?

Let me know if that fixes it.

Thanks,
Ralph





Jeff Norton -> RE: BioEd Installation and COW.Reg Issue (3/16/2007 2:12:22 AM)

Hi Ralph,

Fixed the problem - seems I had a registry problem. After a 'scrub', I did get it to work.

I used your ZIP file, after deleting my earlier attempt, and a cleaning, and, its now working.

Thank you very much for the attention. Beers around!

-J



willboy -> RE: BioEd Installation and COW.Reg Issue (4/7/2007 6:37:30 PM)

Hi Guys
Am experiencing similar problems to Jeff, I have done everything up to the last post...what is scrubbing, and cleaning, afraid you lost me here. Would appreciate any help with this.
Thanks



Jeff Norton -> RE: BioEd Installation and COW.Reg Issue (4/26/2007 6:55:05 PM)

Used a tool called 'regcleaner' that scrubbed out my registry for bad keys, Dwords, and somesuch. Like all databases, the registry can get cluttered with junk/crud, and cause it to slow down.

After a cleaning, it actually worked better, and, allowed BioED to function.

http://www.majorgeeks.com/RegCleaner_d460.html

there are countless others, but, this one I'm familuar with, since I use it at work...

-J



Maxx_slith -> RE: BioEd Installation and COW.Reg Issue (6/10/2007 7:22:38 PM)

Thank you!



vahauser -> RE: BioEd Installation and COW.Reg Issue (1/16/2008 5:26:27 PM)

Okay, I'm having the exact same problem as reported by Jeff Norton above.  I've tried uninstalling and reinstalling TOAW III. 

I've tried using the Registry Cleaner that Jeff Norton recommended (even though I didn't know what I was doing and I'm not sure if I even did anything at all).

I've tried three versions of COW.REG

1st try:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\TalonSoft\The Operational Art of War, CW]
"game_path"="C:\\Matrix Games\\The Operational Art of War III"
(this is per Bob Cross in the 'How to Edit the Equipment Database" manual)

2nd try:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\TalonSoft\The Operational Art of War, CW]
"game_path"="C:\\Matrix Games\\The Operational Art of War III\graphics" 
(note that I added the graphics folder to the path)

3rd try:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\TalonSoft\The Operational Art of War, CW]
"game_path"="C:\Matrix Games\The Operational Art of War III\Graphics" 
(note that I deleted the double slashes and capitalized the spelling of the Graphics folder)

Anyway, none of the above tries succeeded in getting BioEdit to run properly (still getting the multiple \Graphics 'File Not Found' errors).  I don't know if each succeeding try overwrote the preceeding try in the registry (I'm assuming it did).  But if each succeeding try did NOT overwrite the preceeding try in the registry, then I now have three registry entries and I don't know how to get rid of them and start clean (short of re-formatting my hard drive).

Any assistance will be much appreciated.





vahauser -> RE: BioEd Installation and COW.Reg Issue (1/17/2008 2:46:37 AM)

Well, I managed to get BioEd to run properly:

Step 1, uninstall TOAW and delete the TOAW folder
Step 2, reinstall TOAW
Step 3, do NOT apply the 3.22.9.27 upgrade
Step 4, install the BioEd
Step 5, use the REG.COW supplied by Bob Cross in the 'How to Edit the Equipment Database' manual
Step 6, test the BioEd and now it works properly
Step 7, apply the 3.22.9.27 upgrade

And now everything works fine



IronDuke_slith -> RE: BioEd Installation and COW.Reg Issue (3/18/2008 3:09:08 AM)



Just a note for new users who might want to try this. The fiule not found issue that Vahauser and others got is caused (I believe) by their installation of TOAW not being in

"C:\Matrix Games\The Operational Art of War III"

Mine was in "A:\TOAW3"

I was getting the file not found message windows until I edited the relevant registry entry line from

C:\Matrix Games\The Operational Art of War III\Graphics

to

A\TOAW3

Ralph,
does this sound plausible, or have I not really fixed it? The next time I tried Bioed and loaded the COW300 file, it loaded up without any complaint.

Regards,
IronDuke



wmorris -> RE: BioEd Installation and COW.Reg Issue (7/11/2008 4:39:29 AM)

Two problems in attempting to run BioEd; I have latest TOAW version, and I do not have ACOW.

The registry accepts the registry key suggested in the moderator's posts. In the registry the path it made an entry named TOAW, CW. However, in the details of the registry key, the data shows "(value not set)".

When I attempt to run BioEd and load the ACOW 300 file, I get a number of "file not found" prompts, followed by messages stating "reading units, reading counters, building tree" etc. Then when I click units and select a unit type, nothing is there but more "file not found" prompts.

Also, I do not see any file with an .eqp extension in the main graphics file.

The game itself and the editor runs without problems.

???



sPzAbt653 -> RE: BioEd Installation and COW.Reg Issue (7/11/2008 7:39:54 PM)

I have COW, so I don't know about your registry problem. It sounds similar to some of the above posts, but I guess you read those already.

In the main graphics file, sometimes the file extensions are hidden. If you click on the individual scenario (as in this screen shot), you should see the .eqp file. Not all scenarios have a specific .eqp file, most use the standard 'equipment.eqp' file, so there will be no .eqp file seen here.

[image]local://upfiles/24850/B5EC31DD474D402DAB3AFD25DF712A89.jpg[/image]



wmorris -> RE: BioEd Installation and COW.Reg Issue (7/11/2008 10:53:23 PM)

The same thing happens when trying to open any scenario.eqp file.

And even when set to show hidden files, Equipment.eqp is not in the graphics file (nor does a search turn up any equipment.eqp file except in scenarios).

Ugh.



sPzAbt653 -> RE: BioEd Installation and COW.Reg Issue (7/12/2008 5:29:32 AM)

Don't worry about the Equipment.eqp file not being seen. I can't find the post explaining why that is, but it's normal. But you have to make sure that the registry file you added is exactly correct, by following the directions above and/or in the other thread titled 'BioEd Problems'. Sorry I can't better help, but like I said, I've got COW so I don't have any experience with the reg.edit.



wmorris -> RE: BioEd Installation and COW.Reg Issue (7/12/2008 5:53:51 AM)

Thanks, sPz. Im still hacking at it.

After over a dozen registry entries, the workaround may involve getting COW. [sm=00000055.gif]

EDITED:
Ive also directly edited the registry data string without success. arrrgh.

Came back to this. deleted Bioedit, etc. and cleaned the registry entry I made. Started over to no avail.

What's really got me freaked is that I cannot find the original .eqp file anywhere using search function or Explorer, even with hidden files visible and search set to include hidden files.



wmorris -> RE: BioEd Installation and COW.Reg Issue (7/19/2008 5:48:10 PM)

I had TOAW loaded on two 'puters and looked back at the first one I was using. On this one, Equipment.eqp was visible to search, and I had BioEd installed and working in a couple of minutes.

Now wonder where the heck Equipment.eqp is on my other computer. Weirdness Abounds...




ColinWright -> RE: BioEd Installation and COW.Reg Issue (7/19/2008 6:57:32 PM)


quote:

ORIGINAL: wmorris

I had TOAW loaded on two 'puters and looked back at the first one I was using. On this one, Equipment.eqp was visible to search, and I had BioEd installed and working in a couple of minutes.

Now wonder where the heck Equipment.eqp is on my other computer. Weirdness Abounds...




I wonder...

With two computers, could you make a copy of each PBEM turn you receive, play both, and send back the one you liked most?

How about ten computers? One gets visions of some ladder fanatic buying up ten obsolescent machines and hooking them all up in his closet...



Legun -> RE: BioEd Installation and COW.Reg Issue (12/30/2008 5:20:38 AM)

I have installed my TAOWIII in directory:
C:\ACOW

How should my COW.reg file look like?

Please, help [&o]



Curtis Lemay -> RE: BioEd Installation and COW.Reg Issue (12/30/2008 3:24:29 PM)


quote:

ORIGINAL: Legun

I have installed my TAOWIII in directory:
C:\ACOW

How should my COW.reg file look like?

Please, help [&o]



Don't you have ACOW? If so, you don't need to muck with the COW.reg. BioEd should use the ACOW graphics.



Legun -> RE: BioEd Installation and COW.Reg Issue (12/31/2008 2:47:47 AM)

I have not ACOW installed - I just have the directory with such name.
I had installed ACOW on my old stationary PC. I use its HD as an external HD for archive purpose, now.
Anyway, I have installed TOAWIII on my present laptop in the directory "ACOW" to have it on the top of the list of my directories. 



sPzAbt653 -> RE: BioEd Installation and COW.Reg Issue (12/31/2008 5:09:28 AM)

Legun, did you see the above post #13 from IronDuke? I have COW so I didn't need to make the registry change, but it seems like Mr. Iron and vahauser found the proper configuration in the above posts. The original instructions are found in the 'manuals' folder in the 'How to edit the equipment database' pdf.



Legun -> RE: BioEd Installation and COW.Reg Issue (12/31/2008 8:54:40 AM)


quote:

ORIGINAL: sPzAbt653

Legun, did you see the above post #13 from IronDuke? I have COW so I didn't need to make the registry change, but it seems like Mr. Iron and vahauser found the proper configuration in the above posts. The original instructions are found in the 'manuals' folder in the 'How to edit the equipment database' pdf.

I've tried this:

Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\TalonSoft\The Operational Art of War, CW]
“game_path”=”C:\\ACOW”

but there is no effect :(



Curtis Lemay -> RE: BioEd Installation and COW.Reg Issue (12/31/2008 3:52:42 PM)


quote:

ORIGINAL: Legun

I have not ACOW installed...


Well then, re-install it. If space is really an issue, then delete everything except the few graphic files BioEd uses.



Legun -> RE: BioEd Installation and COW.Reg Issue (1/3/2009 3:39:20 AM)


quote:

ORIGINAL: Curtis Lemay


quote:

ORIGINAL: Legun

I have not ACOW installed...


Well then, re-install it. If space is really an issue, then delete everything except the few graphic files BioEd uses.

Space isn't an issue - I just can't find the ACOW CD :(. The little registry change could save the problem - but someone who know what I should change is needed. Is there anybody out there?..



ColinWright -> RE: BioEd Installation and COW.Reg Issue (1/3/2009 4:24:44 AM)


quote:

ORIGINAL: Legun


quote:

ORIGINAL: Curtis Lemay


quote:

ORIGINAL: Legun

I have not ACOW installed...


Well then, re-install it. If space is really an issue, then delete everything except the few graphic files BioEd uses.

Space isn't an issue - I just can't find the ACOW CD :(. The little registry change could save the problem - but someone who know what I should change is needed. Is there anybody out there?..


I have files that allow ACOW to run without the disc. Dunno exactly how, though -- Ben helped me through it one afternoon, and now I run ACOW without the disc. I can e-mail you my 'discless TOAW' folder and you can make of it what you can. Perhaps you might also point me to what registry entries to look for.



Legun -> RE: BioEd Installation and COW.Reg Issue (1/3/2009 11:49:43 AM)

Thanks, Colin. I'm not sure if it's possible to install ACOW without the disc, but I could try. Send it, if you can.



ColinWright -> RE: BioEd Installation and COW.Reg Issue (1/3/2009 9:44:45 PM)

Jarek:

I sent off what seemed to be what you need to the address I have for you. If nothing shows up, e-mail me with your correct address. wrightmoving@sbcglobal.net



Page: [1] 2   next >   >>

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
4.984375