RE: WitPTracker AE Release 1.10 Available! (Full Version)

All Forums >> [New Releases from Matrix Games] >> War in the Pacific: Admiral's Edition



Message

n01487477 -> RE: WitPTracker AE Release 1.10 Available! (10/26/2016 4:28:20 AM)


quote:

ORIGINAL: larryfulkerson

Of the four that were "errors" I edited the region file ( Kull ) I'm using and this image is AFTER I have applied the
edited region file and I see that Ahmedabad is still spelled wrong so I think the errors are coming from the scenario
save file instead of the region file. Also, when I edited the region file there didn't appear to be the need for any
changes at all. And Tracker is showing garbage at the ends of two of the cities and I know for a fact that the region
file is clean. These errors are in the scenario save file.

EDIT: I would edit the save game file myself if I knew how. I'm not sure how to turn a *.pws file into a scenario that
can be edited. I'm not sure it can be done. The save game file is too large to post here probably.

EDIT2: I looked at the scenario in the editor and it turns out that the two names that have garbage following their
names are too long for the name field in the editor. It's not getting the newline character or the '0' end of input
character that's needed for the end of the line to be designated.

Yup - that may be our fault for not recognizing enough characters in the name or a scenario fault. I don't believe it will create a problem but if there is I'll get you to link the scenario file so I can have a look.

I would just manually assign those places to regions and be done with it for now. Let me know if there are any data errors for future turns



glyphoglossus -> RE: WitPTracker AE Release 1.10 Available! (10/31/2016 5:24:04 PM)

Just getting into the higher dimensions of the game (i.e., from "Coral Sea" to "Guadalcanal").

When trying to plan reinforcements / invasion troop transports, I need to calculate the total troop and supply load cost of units I plan to transport. Can I see this information somewhere in the WitPTracker tables? In WitPTracker, I see "base load cost", but this appears to be the stacking cost. As such, I have to click on each individual unit and separately record and and sum up this total. Which is very inefficient and tedious.

Same goes for the political points required to change the HQ or leaders of LCU's: can this information be viewed anywhere in the WitP tables?

Thanks!



floydg -> RE: WitPTracker AE Release 1.10 Available! (11/1/2016 12:58:21 PM)


quote:

ORIGINAL: n01487477

Hi Floyd - it's been a while and I just wanted to give you a shout out for continuing to work on Tracker. I bet you wished that we programmed it in C# now ...[:D]

Your coding side-kick in absentia.


Best wishes, mate.
Never look back!



floydg -> RE: WitPTracker AE Release 1.10 Available! (11/1/2016 1:01:23 PM)


quote:

ORIGINAL: glyphoglossus

Just getting into the higher dimensions of the game (i.e., from "Coral Sea" to "Guadalcanal").

When trying to plan reinforcements / invasion troop transports, I need to calculate the total troop and supply load cost of units I plan to transport. Can I see this information somewhere in the WitPTracker tables? In WitPTracker, I see "base load cost", but this appears to be the stacking cost. As such, I have to click on each individual unit and separately record and and sum up this total. Which is very inefficient and tedious.

Same goes for the political points required to change the HQ or leaders of LCU's: can this information be viewed anywhere in the WitP tables?

Thanks!


Yeah, that was something I had started but not finished -- an invasion planner with all of that stuff. Maybe some day.



glyphoglossus -> RE: WitPTracker AE Release 1.10 Available! (11/1/2016 2:33:52 PM)


quote:

ORIGINAL: floydg


quote:

ORIGINAL: glyphoglossus

Just getting into the higher dimensions of the game (i.e., from "Coral Sea" to "Guadalcanal").

When trying to plan reinforcements / invasion troop transports, I need to calculate the total troop and supply load cost of units I plan to transport. Can I see this information somewhere in the WitPTracker tables? In WitPTracker, I see "base load cost", but this appears to be the stacking cost. As such, I have to click on each individual unit and separately record and and sum up this total. Which is very inefficient and tedious.

Same goes for the political points required to change the HQ or leaders of LCU's: can this information be viewed anywhere in the WitP tables?

Thanks!


Yeah, that was something I had started but not finished -- an invasion planner with all of that stuff. Maybe some day.


Great. Also just want to take the opportunity to say, "THANKS!" for such a great tool!



scondon87 -> RE: WitPTracker AE Release 1.10 Available! (11/4/2016 12:42:14 AM)

Not sure how relevant it is, but I got the same error this evening after upgrading from 1.9.2 (on Java 6) to 1.10 (on Java 8). Error happens when trying to load in a new turn. Memory was doing fine, though bumping xms up to 512m got the tracker db to load a bunch faster.

Turns out that when I upgraded the properties file, it went from SaveMode=1 to SaveMode=0. I switched it back, and everything worked beautifully. So it wasn't a memory issue at all, but instead caused by being unable to find the save file.

Just leaving this here in case it helps someone else upgrading Tracker. Great program, by the way! Even if I really only use it to catch units that have finished moving at this point.

EDIT: That's in reply to #3424, don't know why it wouldn't let me quote the post.



adarbrauner -> RE: WitPTracker AE Release 1.0 (11/6/2016 3:35:22 AM)

Hello;

while trying to download the Zip file from GoogleSites, the file is identified as virus carrier, and blocked.

Any suggestion, please?



floydg -> RE: WitPTracker AE Release 1.0 (11/6/2016 2:51:00 PM)


quote:

ORIGINAL: adarbrauner

Hello;

while trying to download the Zip file from GoogleSites, the file is identified as virus carrier, and blocked.

Any suggestion, please?


Some people have that issue, but it's not infected. Best you can do is disable the firewall.



adarbrauner -> RE: WitPTracker AE Release 1.10 Available! (11/8/2016 2:57:26 PM)

Hello Floyd;

after having turned off the antivirus, the zip file was downloaded;

but, what to do to have it installed (cannot see any EXE file in it)?



chemkid -> RE: WitPTracker AE Release 1.10 Available! (11/8/2016 3:18:32 PM)

.



szmike -> RE: WitPTracker AE Release 1.10 Available! (11/12/2016 9:27:41 AM)

I have no Alerts at all. Game against AI. No such problem for PBEM game. Is there any trick to get it to work? Everything else shows OK.



n01487477 -> RE: WitPTracker AE Release 1.10 Available! (11/12/2016 2:25:32 PM)


quote:

ORIGINAL: szmike

I have no Alerts at all. Game against AI. No such problem for PBEM game. Is there any trick to get it to work? Everything else shows OK.

They are generated after the 2nd turn is read. I assume you haven't read 2 turns yet ?



szmike -> RE: WitPTracker AE Release 1.10 Available! (11/12/2016 3:34:00 PM)


quote:

ORIGINAL: n01487477


quote:

ORIGINAL: szmike

I have no Alerts at all. Game against AI. No such problem for PBEM game. Is there any trick to get it to work? Everything else shows OK.

They are generated after the 2nd turn is read. I assume you haven't read 2 turns yet ?


Correct. Thank you.



adarbrauner -> RE: WitPTracker AE Release 1.10 Available! (11/12/2016 8:50:13 PM)

yES, EVERYTHING WORKING, THANK YOU.

as for the regions, should this mean that I can define a region and choose evry unit in it for a check (for example)?
And how to do it, practically?



sanderz -> RE: WitPTracker AE Release 1.10 Available! (11/13/2016 9:34:57 AM)

I am getting the following error using tracker version 1.1 and java jre1.8.0_101

quote:

Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at witptracker.AircraftComparePanel.SetPlaneInfo(AircraftComparePanel.java:580)
at witptracker.AircraftComparePanel.actionPerformed(AircraftComparePanel.java:499)
at javax.swing.JComboBox.fireActionEvent(Unknown Source)
at javax.swing.JComboBox.setSelectedItem(Unknown Source)
at javax.swing.JComboBox.setSelectedIndex(Unknown Source)
at javax.swing.plaf.basic.BasicComboPopup$Handler.mouseReleased(Unknown Source)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at javax.swing.plaf.basic.BasicComboPopup$1.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$500(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue$4.run(Unknown Source)
at java.awt.EventQueue$4.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)



this is on BigB mod after i updated the scenario file, then deleted all the trackerDB files and ran it again --- what happens is the in the plane comparison section the dropdowns get stuck on the first plane, so even if you choose a different plane the pic and stats don't change

any suggestions for whats going on here and how to correct?

many thanks

EDIT: just noticed i get the following when i first start tracker
quote:

java.sql.SQLException: Numeric value out of range
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.jdbcStatement.fetchResult(Unknown Source)
at org.hsqldb.jdbc.jdbcStatement.executeUpdate(Unknown Source)
at witptracker.Database.InsertRow(Database.java:54)
at witptracker.Device.InsertInTable(Device.java:242)
at witptracker.SaveFileReader.ReadDeviceInfo(SaveFileReader.java:1276)
at witptracker.SaveFileReader.<init>(SaveFileReader.java:170)
at witptracker.Main.main(Main.java:141)
Insert Error code = -65
Table=Devices Values=(213,'Atomic Bomb',3,20000,0,65500,65500,150,0,0,0,65500,65500,213,2,45,6,1,99,99)
WitP Tracker AE tables loaded in 3 secondsjava.sql.SQLException: Numeric value out of range
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.jdbcStatement.fetchResult(Unknown Source)
at org.hsqldb.jdbc.jdbcStatement.executeUpdate(Unknown Source)
at witptracker.Database.InsertRow(Database.java:54)
at witptracker.Device.InsertInTable(Device.java:242)
at witptracker.SaveFileReader.ReadDeviceInfo(SaveFileReader.java:1276)
at witptracker.SaveFileReader.<init>(SaveFileReader.java:170)
at witptracker.Main.main(Main.java:141)
Insert Error code = -65
Table=Devices Values=(213,'Atomic Bomb',3,20000,0,65500,65500,150,0,0,0,65500,65500,213,2,45,6,1,99,99)
WitP Tracker AE tables loaded in 3 seconds



floydg -> RE: WitPTracker AE Release 1.10 Available! (11/13/2016 1:23:07 PM)


quote:

ORIGINAL: sanderz

I am getting the following error using tracker version 1.1 and java jre1.8.0_101

quote:

Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at witptracker.AircraftComparePanel.SetPlaneInfo(AircraftComparePanel.java:580)
at witptracker.AircraftComparePanel.actionPerformed(AircraftComparePanel.java:499)
at javax.swing.JComboBox.fireActionEvent(Unknown Source)
at javax.swing.JComboBox.setSelectedItem(Unknown Source)
at javax.swing.JComboBox.setSelectedIndex(Unknown Source)
at javax.swing.plaf.basic.BasicComboPopup$Handler.mouseReleased(Unknown Source)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at javax.swing.plaf.basic.BasicComboPopup$1.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$500(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue$4.run(Unknown Source)
at java.awt.EventQueue$4.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)



this is on BigB mod after i updated the scenario file, then deleted all the trackerDB files and ran it again --- what happens is the in the plane comparison section the dropdowns get stuck on the first plane, so even if you choose a different plane the pic and stats don't change

any suggestions for whats going on here and how to correct?

many thanks

EDIT: just noticed i get the following when i first start tracker
quote:

java.sql.SQLException: Numeric value out of range
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.jdbcStatement.fetchResult(Unknown Source)
at org.hsqldb.jdbc.jdbcStatement.executeUpdate(Unknown Source)
at witptracker.Database.InsertRow(Database.java:54)
at witptracker.Device.InsertInTable(Device.java:242)
at witptracker.SaveFileReader.ReadDeviceInfo(SaveFileReader.java:1276)
at witptracker.SaveFileReader.<init>(SaveFileReader.java:170)
at witptracker.Main.main(Main.java:141)
Insert Error code = -65
Table=Devices Values=(213,'Atomic Bomb',3,20000,0,65500,65500,150,0,0,0,65500,65500,213,2,45,6,1,99,99)
WitP Tracker AE tables loaded in 3 secondsjava.sql.SQLException: Numeric value out of range
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.jdbcStatement.fetchResult(Unknown Source)
at org.hsqldb.jdbc.jdbcStatement.executeUpdate(Unknown Source)
at witptracker.Database.InsertRow(Database.java:54)
at witptracker.Device.InsertInTable(Device.java:242)
at witptracker.SaveFileReader.ReadDeviceInfo(SaveFileReader.java:1276)
at witptracker.SaveFileReader.<init>(SaveFileReader.java:170)
at witptracker.Main.main(Main.java:141)
Insert Error code = -65
Table=Devices Values=(213,'Atomic Bomb',3,20000,0,65500,65500,150,0,0,0,65500,65500,213,2,45,6,1,99,99)
WitP Tracker AE tables loaded in 3 seconds



Version 1.1 or 1.10? Assuming it's 1.10, can you send me a save (witptracker@gmail.com)?




sanderz -> RE: WitPTracker AE Release 1.10 Available! (11/13/2016 2:12:48 PM)


quote:

ORIGINAL: floydg




Version 1.1 or 1.10? Assuming it's 1.10, can you send me a save (witptracker@gmail.com)?





i think i have sorted it - your mention of save games made me realise that i may have been loading the wrong save (as defined from the properties)

so far it looks ok

thanks



hamakaze -> RE: WitPTracker AE Release 1.10 Available! (11/15/2016 5:50:45 AM)

HELP[&:]

[image]local://upfiles/55394/23A08B87E0ED4C11976A5A1D8E354CBE.jpg[/image]



floydg -> RE: WitPTracker AE Release 1.10 Available! (11/15/2016 11:42:23 AM)


quote:

ORIGINAL: hamakaze

HELP[&:]

[image]local://upfiles/55394/23A08B87E0ED4C11976A5A1D8E354CBE.jpg[/image]


Save file could be corrupted. Does it load fine in the game itself?



Dirtnap86 -> RE: WitPTracker AE Release 1.10 Available! (11/27/2016 12:21:07 AM)

Newbie here, is the link in the first post the most up to date?

I just bought the game (about an hour ago) but have been lurking around for a few months, reading AARs.



floydg -> RE: WitPTracker AE Release 1.10 Available! (11/27/2016 1:01:31 AM)


quote:

ORIGINAL: Dirtnap86

Newbie here, is the link in the first post the most up to date?

I just bought the game (about an hour ago) but have been lurking around for a few months, reading AARs.


Yes, that's the latest.



Dirtnap86 -> RE: WitPTracker AE Release 1.10 Available! (11/27/2016 3:44:14 AM)


quote:

ORIGINAL: floydg


quote:

ORIGINAL: Dirtnap86

Newbie here, is the link in the first post the most up to date?

I just bought the game (about an hour ago) but have been lurking around for a few months, reading AARs.


Yes, that's the latest.


much obliged.



reezing -> RE: WitPTracker AE Release 1.10 Available! (11/30/2016 12:08:14 AM)

Just bought the game and updated it to the newest version. WiTPTracker worked fine for the Coral Sea Scenario, but when I started the campaign I got this:

WARNING: Unknown row in operations file <C:\Stuff\WiTP\SAVE\aoperationsreport_411207.txt>: [SLDR Henderson, A.D. of No.8 Sqn RAAF Det bails out with WOUNDS but is RESCUED]
Exception in thread "AWT-EventQueue-0" java.lang.OutOfMemoryError: Java heap space
at java.awt.image.DataBufferInt.<init>(Unknown Source)
at java.awt.image.Raster.createPackedRaster(Unknown Source)
at java.awt.image.DirectColorModel.createCompatibleWritableRaster(Unknown Source)
at java.awt.image.BufferedImage.<init>(Unknown Source)
at witptracker.MapPanel$Map.<init>(MapPanel.java:440)
at witptracker.MapPanel.<init>(MapPanel.java:229)
at witptracker.GUIMain.CreateAndShowGUI(GUIMain.java:920)
at witptracker.GUIMain$5.run(GUIMain.java:1042)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$500(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)

C:\Users\Tony\Downloads\WitPTracker AE Release 1.10>pause
Press any key to continue . . .


This is fixed when I use the nomap version

Edit: Fixed when I changed the max memory to 1024



Revthought -> RE: WitPTracker AE Release 1.10 Available! (1/12/2017 7:01:37 PM)

Trying to install the tracker on a new machine, and Windows 10 is not happy about it.



BillBrown -> RE: WitPTracker AE Release 1.10 Available! (1/12/2017 11:28:06 PM)


quote:

ORIGINAL: Revthought

Trying to install the tracker on a new machine, and Windows 10 is not happy about it.


Maybe something is wrong? A whole lot more info might give someone a chance to help you.



btd64 -> RE: WitPTracker AE Release 1.10 Available! (1/12/2017 11:31:20 PM)

Include screen shots of any error messages....GP



Revthought -> RE: WitPTracker AE Release 1.10 Available! (1/13/2017 2:05:41 PM)


quote:

ORIGINAL: BillBrown


quote:

ORIGINAL: Revthought

Trying to install the tracker on a new machine, and Windows 10 is not happy about it.


Maybe something is wrong? A whole lot more info might give someone a chance to help you.


I was able to make it work. It wasn't so much the error message as it was the "built in" windows defender insisting that the tracker was malware.



palioboy2 -> RE: WitPTracker AE Release 1.10 Available! (1/17/2017 5:52:55 AM)

[image]https://s28.postimg.org/ebmy0gx5p/help.png[/image]

Any help gents?



Schorsch -> RE: WitPTracker AE Release 1.10 Available! (1/17/2017 8:32:11 AM)

out of memory error. read the possible solutions on the tracker homepage



fulcrum28 -> RE: WitPTracker AE Release 1.10 Available! (1/18/2017 1:42:43 PM)

press any key to continue.. that is my status now..

I'm playing campaign and i would really need this marvelous tool..

I first tested with coral sea battle and it worked!
then, i started campaign and after i saved two turns, I tried to open again and since then "press any key to continue"..
i tried to upload the save of coral sea battle and then..again "press any key to continue"...

where is the problem?



Page: <<   < prev  180 181 [182] 183 184   next >   >>

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
1.125