|
Anathema -> RE: WIP - RAAF Bases (12/31/2013 10:24:47 AM)
|
Sure, here is what I have, although from taking a look at your screenshots you probably have a much better idea than me about these things. As I said I was just taking a best guess from the satellite imagery, although HQJOC is pretty hard to miss and I am certain I have the right one in that case.
Included is:
1. HQJOC, although it is just the main building and not the second at the entrance.
2. RAAF Air Command/Glenbrook, again is just one building and I am not sure it is the correct one, but there was only a couple to choose from.
3. RAAF Northern ROC, again just the bunker and I am not sure it is the correct one.
4. ASD (formerly DSD) Shoal Bay & Cocos Island Receiving Stations, again just a single building since I couldn't decide on a match for the sat dishes/radio masts.
5. Timor Sea and North West Shelf oil/gas Facilities.
The oil and gas facilities locations are taken from various sources on the web, often from environmental reports which are made public and had maps with precise coordinates, but I couldn't get data on all of the ones that appear to be operating and no way to confirm this with imagery. Also note that I included planned projects that are under development and will be operating in the future. The floating production vessels are represented with a LNG tanker, so if you use them you will need to make sure they stay where they are. I also simply used class C platforms for everything, since I couldn't always confirm the size in most cases and those that I could are often smaller, even unmanned, which didn't really have a good match in the database.
If you want to add the appropriate comms equipment to HQJOC or other buildings these are the records you need to add, but I suspect the unique IDs are unique to each specific scenario, so you will have add this to your own config templates. It is easiest if you just export one and then add the following to each entry where needed, then reimport it. The manual should explain it all, but I am happy to help if something doesn't make sense.
Edit: this includes all the generic comms in the database, in case anyone wants them I have a full list if you want anything else.
quote:
<CommAdd_20 />
<!--UHF/VHF Radio [Unsecure]-->
<CommAdd_195 />
<!--UHF Radio [Unsecure]-->
<CommAdd_194 />
<!--VHF Radio [Unsecure]-->
<CommAdd_238 />
<!--HF Radio [Unsecure]-->
<CommAdd_196 />
<!--MF Radio [Unsecure]-->
<CommAdd_206 />
<!--LF Radio [Unsecure]-->
<CommAdd_213 />
<!--VLF Radio [Unsecure]-->
<CommAdd_72 />
<!--HF Radio [Secure]-->
<CommAdd_187 />
<!--UHF/VHF Radio [Secure]-->
<CommAdd_209 />
<!--VHF Radio [Secure]-->
<CommAdd_264 />
<!--UHF Radio [Secure]-->
<CommAdd_239 />
<!--MF Radio [Secure]-->
<CommAdd_229 />
<!--VLF/LF Reciever [Secure]-->
<CommAdd_212 />
<!--Commercial SATCOM-->
<CommAdd_222 />
<!--MILSTAR SATCOM UHF-->
For the ASD receiving stations, you will also have to add the ESM/ELINT stuff, but you can do that in the editor since it is listed as a sensor.
Finally ADF Facilities is attached to this post.
|
|
|
|
