Scenario Editor (Full Version)

All Forums >> [New Releases from Matrix Games] >> War in the Pacific: Admiral's Edition >> Tech Support



Message

djr007 -> Scenario Editor (11/30/2017 1:01:47 PM)

I just bought the game. But when, I open the Editor, I find that there are no scenarios to modify or edit. Help please



Alfred -> RE: Scenario Editor (11/30/2017 2:16:45 PM)

Scenario slots 1-25 inclusive are reserved for official scenarios.  It is not possible to save any alteration to these slots.

You will have to open one of the official scenarios and save it to a slot higher than #25.  Then open this "new" scenario and do your edits.

Alfred



djr007 -> RE: Scenario Editor (11/30/2017 4:33:34 PM)

That's the problem. Slots 1-25 are blank.



Alfred -> RE: Scenario Editor (11/30/2017 5:01:24 PM)

Forget about trying to edit or modify a scenario.

Start up the game and confirm you can select a scenario to start play as either the Japanese or Allied player.  If none are available, then you haven't properly installed the game.

Alfred



djr007 -> RE: Scenario Editor (11/30/2017 6:12:44 PM)

I was able to do that. Are you suggesting that I must settle for a less than complete product?



Alfred -> RE: Scenario Editor (11/30/2017 8:35:37 PM)

If you can start a game using any of the official scenarios then you can load any of them into the editor and do what I said in post #2.  If your post #3 is true then you can't start a game at all because there are no scenarios in those slots.

Read the Editor PDF manual found in your manual sub-folder.

Alfred  



djr007 -> RE: Scenario Editor (12/1/2017 11:16:58 AM)

I have started the Ironman scenario, played the first turn, then saved in slot 26. However, the Editor slots are still blank, with none of the pre-loaded scenarios or my saved turn.


Perhaps I should add that my laptop uses Window 10?



BBfanboy -> RE: Scenario Editor (12/1/2017 1:40:43 PM)


quote:

ORIGINAL: djr007

I have started the Ironman scenario, played the first turn, then saved in slot 26. However, the Editor slots are still blank, with none of the pre-loaded scenarios or my saved turn.


Perhaps I should add that my laptop uses Window 10?

It sounds like you are confusing the "Save Game" slots which are for gameplay use with the "Scenario Slots" which have the actual database info. As Alfred said, once you start the Editor program, it is blank because it does not know which scenario you want to look at. So you must go to the disk icon at the upper left and select "Open File" and it will list the scenarios it has available. Choose the one you want and it will load up the info.
The various data is arranged according to the headings at the top so you need to try each of the headings to find everything you are looking for.
For example, "Locations" contains Base info as you might expect, but also unit info since they must be on the map already or appear later in one of the locations in the DB.



Alfred -> RE: Scenario Editor (12/1/2017 4:04:09 PM)


quote:

ORIGINAL: djr007

I have started the Ironman scenario, played the first turn, then saved in slot 26. However, the Editor slots are still blank, with none of the pre-loaded scenarios or my saved turn.


Perhaps I should add that my laptop uses Window 10?


You cannot edit a saved game.

1. Launch the editor.
2. Open one of the official scenarios.
3. Immediately "save as" the chosen official scenario to a scenario slot above #25.
4. Exit editor.
5. Really read the PDF editor manual. You are not that knowledgeable to be able to "wing" your way without knowing what the different editor fields represent.
6. Launch the editor.
7. Open the scenario # you saved in step 3 above.
8. Edit the scenario.
9. Save scenario #.
10. Exit the editor.

For further modifications follow steps #6-10 inclusive.

Alfred



djr007 -> RE: Scenario Editor (12/1/2017 8:41:06 PM)

I appreciate your advice, and have played the game for years on an older computer. I also understand that when opening the editor I must slect one of the pre-loaded scenarios. The problem is that none of those scenarios exist in the editor. They do in the Game Menu, but not the editor.



djr007 -> RE: Scenario Editor (12/1/2017 8:45:10 PM)

I understand what you are saying, but when I open the scenario editor and click on open file, all the slots are blank...there are no official scenarios present. I know this is not right as I have the game on an older computer and the information is all there.



BBfanboy -> RE: Scenario Editor (12/2/2017 2:32:58 AM)

It sounds like your scenarios are in a different directory in the file system than the game. Did you have the game previously and then update it or re-install in a different directory. Post a screenshot of the file system that includes the game files if you can.



djr007 -> RE: Scenario Editor (12/2/2017 9:19:56 AM)

Is it possible to transfer a game installed in one game and transfer it to another?



m10bob -> RE: Scenario Editor (12/2/2017 12:51:47 PM)

If you are unable to see the stock scenarios in the editor, the editor is not looking at the correct folder whatsoever.
Check the path of the game itself, (normally it will be inside the Matrixgames folder.)
Open that Matrixgames folder and look for the WITPAE folder.
Open it and look for the editor icon.
Open it and at top left corner, load the scenario folder. (It will show the path which you wish to open.)

For ease, as I edit OFTEN, and have for years, I create a desktop shortcut for the editor.
Just remember when you "load" the scenario file to check the path you with to edit.



djr007 -> RE: Scenario Editor (12/2/2017 1:51:42 PM)

What is the Matrix folder? I assume it is not the desktop icon.



BBfanboy -> RE: Scenario Editor (12/2/2017 4:40:09 PM)


quote:

ORIGINAL: djr007

What is the Matrix folder? I assume it is not the desktop icon.

Open "Windows Explorer" (should be an icon on your screen edge with a folder in a holder).
Win Explorer will display your file system as a "Root" structure. Your main storage device is your hard drive "C:" and everything else branches off from it.
DO NOT mess with the Windows set of files if you do not know what you are doing.
If you let the game install with no changes there should be a set of files under a folder called Matrix Games. You may need to click on the C: to expand the list of files there, then click on Matrix Games folder to expand that. From there your WITP-AE stuff should be easy to see. Just click on any folder to see contents.



djr007 -> RE: Scenario Editor (12/2/2017 7:04:20 PM)

I followed your instructions (BTW in Windows 10 it's called "File Explorer") Located the Editor files. They are all blank. No scenarios.



BBfanboy -> RE: Scenario Editor (12/2/2017 9:31:37 PM)

Well the game knows where to find the scenarios so you could just copy the game scenario files over to wherever you have the editor. Any scenarios you create in editor you might have to copy back to the game area to play them.

But if installed properly, the editor should be able to find the scenario files the game is using. I suspect you changed the "Look in" path in the shortcut you have for the Editor or the Autorun.exe if you start the Editor from there. Make sure the path follows all the folders to where the files are.



djr007 -> RE: Scenario Editor (12/2/2017 9:45:34 PM)

I thank everyone for their help, but this is sounding just wy too complex for me. I already have the game on another computer and the files were all where they were supposed to be. I suspect that if I have o alternative that to buy another copy from Matrix. It sounds like a rip-off, but what else can I do?



Chris21wen -> RE: Scenario Editor (12/2/2017 10:38:50 PM)

Have started the correct Editor and clicked on File do you see anything on the left side of the Scenario List box?


[image]local://upfiles/5388/2AAEA6A08CA042988277BEF9A359DFF2.jpg[/image]



Chris21wen -> RE: Scenario Editor (12/2/2017 10:54:30 PM)


quote:

ORIGINAL: djr007

I thank everyone for their help, but this is sounding just wy too complex for me. I already have the game on another computer and the files were all where they were supposed to be. I suspect that if I have o alternative that to buy another copy from Matrix. It sounds like a rip-off, but what else can I do?



You don't have to buy another copy. Just use your original and install it on the new computer. If you don't have the original and you registered it or if you didn't register it but can prove you purchased it then I believe you can re download again.



djr007 -> RE: Scenario Editor (12/3/2017 10:59:09 AM)

I do the same thing, but all the slots are blank. I would provide proof, but I do not know how to produce a screenshot.



witpqs -> RE: Scenario Editor (12/3/2017 2:13:55 PM)


quote:

ORIGINAL: djr007

I do the same thing, but all the slots are blank. I would provide proof, but I do not know how to produce a screenshot.

Something is going wrong with your installation process. Try disabling your antivirus while you install.



djr007 -> RE: Scenario Editor (12/3/2017 3:17:31 PM)

I did that...at least all the firewalls that I am aware of.



BBfanboy -> RE: Scenario Editor (12/3/2017 3:56:05 PM)

quote:

ORIGINAL: djr007

I do the same thing, but all the slots are blank. I would provide proof, but I do not know how to produce a screenshot.

See my post #11 in this thread in the War Room:

http://www.matrixgames.com/forums/tm.asp?m=4391507&mpage=1&#



Page: [1]

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
1.09375