[ANSWERED] Depth presets not going to required depths. (Full Version)

All Forums >> [New Releases from Matrix Games] >> Command: Modern Operations series >> Tech Support



Message

Dannyp19 -> [ANSWERED] Depth presets not going to required depths. (1/16/2018 2:24:03 AM)

Hello guys,

In the attached save, sub SSN 645 USS James K. Polk. (really any sub in this save) The presets dont send the sub to the right depth. Selecting surface, periscope depth or shallow keeps the depth at -131. selecting over the layer keeps the depth at -98.

The slider bar works as designed and I can manually control depth this way OK.

Didnt know if this is a known issue or not.

Thank you



stilesw -> RE: Depth presets not going to required depths. (1/16/2018 2:48:59 PM)

Dannyp19,

Likely a simple fix. Check the doctrine settings for the sub. "Dive when threat is detected" is set to "Yes, on ESM detection and threat proximity". This setting will override a manual choice. Turn the setting to "No" and that should (probably) fix the issue.

-Wayne Stiles


[image]local://upfiles/49187/3E1AAC1E5C28471DA7DB8961CA05D256.jpg[/image]



Dannyp19 -> RE: Depth presets not going to required depths. (1/16/2018 5:29:43 PM)

Thanks Wayne that was the problem. I had totally forgotten about ASW Doctrines. Sorry to waste your time.



stilesw -> RE: Depth presets not going to required depths. (1/16/2018 6:08:56 PM)

Hey Danny,

No problem at all and certainly not wasted time! I'm glad I could help another CMANO member.

(BTW, there is a $1000.00 fee, payable in Bitcoins!). [:D]

-Wayne



Page: [1]

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
1.232422