Campaign Series Middle East 2.00 SUPPORT THREAD (Full Version)

All Forums >> [New Releases from Matrix Games] >> Campaign Series: Middle East 1948-1985 >> Tech Support



Message

Jason Petho -> Campaign Series Middle East 2.00 SUPPORT THREAD (1/28/2018 8:02:57 PM)

For Game Crashes

In case the game won't start or crashes, please be so kind and provide us and/or the Matrix Technical Support with the following information:

1. Locate the error.log at the installation folder \Campaign Series Middle East\logs
2. Briefly describe the problem, attach the error.log file in your post.
3. In order to get comprehensive information about your system specifications, please run DirectX Diagnostic and
proceed as follows.


How to get a DirectX Diagnostic file?

1. Click on "START".
2. Click "run".
3. Type in "dxdiag" and click "OK".
4. Check through the tabs and perform all tests.
5. Click "Save all Information..." and save the text file to a location of your choice.

Windows 10 Users

1.In Windows, select Start + Windows Key
2. Enter dxdiag into the search box on the taskbar
3. Select dxdiag from the results
4. In the tool, select Save All Information for an easily shared format

We do prefer that both, the error.log and DxDiag file(s) be posted as message attachments (.ZIP) rather than pasted into the body of the post.


My Unit Viewer is not working. What can I do?

Make sure the path in settings.txt links to the directory you installed CSME

1. Locate settings.txt in \Campaign Series Middle East\tools\CS_UnitViewer
2. Check if the following points to your installation directory - Middle East=<drive letter>:\<Path where CSME is installed>
3. If you got CSME installed on your D drive, the line would look like: Middle East=D:\Campaign Series Middle East


Windows 10 Support Recommendations

Are you having problems installing CSME 2.00 onto your Windows 10 machine?

Try the following:

1. Uninstall Campaign Series Middle East 1.02
2. Install Campaign Series Middle East 2.00 - We recommend you install the game in C:\Matrix_Games\.. or C:\Games instead of the default C:\Program Files (x86).
3. If it fails to launch, turn off/disable your Anti-Virus Software (problems have been reported with Avast, Webroot Security &
MalwareBytes Anti-virus) and try again.

Are you having problems with scaling on a 4K monitor/TV?

Try the following:

1. Try 1920x1200 resolution
2. Try 3840 on w10 64 bit nvidia with 175% Scaling
3. Try 300% Scaling


Is your Windows 10 performance very slow and the mouse not very responsive?

Try the following:

1. Go to http://www.nongnu.org/wined3d/
2. Look for full directory (with older versions, patches...) - http://download.savannah.nongnu.org/releases/wined3d
3. Than look for v1.1.38 / 24-Jun-2013 20:02
4. Download the wined3d.exe
5. Don't run the program! Extract It with 7zip, WinRAR or a similar program
6. Copy ddraw.dll, libwine.dll and wined3d.dll into the root folder of your CSME installation

Additionally, start CSME and check if:

Options > Auto Scroll set to OFF
Options > Smooth Scroll set to OFF


How can I activate DirectPlay or DirectDraw on Windows 10?

As DirectPlay and Direct3D/DirectDraw features could be useful to run less recent games and other classics, here are some steps on how to activate them on Windows 10:

Activate DirectPlay:

1. Press the Windows key and the R key at the same time.
2. In the Open box, type Control Panel and click OK.
3. Then, select Programs.
4. Finally, click on Turn Windows Features on or off and turn on the DirectPlay feature in this new window.

Klink, Oberst



Spartan7 -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/15/2018 10:52:18 PM)

Games will not run on new W10 machine. Anti virus off

Error Log:
2018-02-01 19:47:21 meengine.exe: [ERROR ID 500] (WindowDD.cpp, line 118, XCWindowDD::CreatePrimary()) Failure to create primary surface
2018-02-02 16:56:31 meengine.exe: [ERROR ID 486] (engine.cpp, line 869, CheckSer()) There is an error running the application.
Please contact support@matrixgames.com for assistance.
Error Code: 486
2018-02-02 16:56:54 meengine.exe: [ERROR ID 486] (engine.cpp, line 869, CheckSer()) There is an error running the application.
Please contact support@matrixgames.com for assistance.
Error Code: 486
2018-02-02 17:17:39 meengine.exe: [ERROR ID 486] (engine.cpp, line 869, CheckSer()) There is an error running the application.
Please contact support@matrixgames.com for assistance.
Error Code: 486
2018-02-15 16:54:26 meengine.exe: [ERROR ID 486] (engine.cpp, line 869, CheckSer()) There is an error running the application.
Please contact support@matrixgames.com for assistance.
Error Code: 486
2018-02-15 17:08:42 Middle East.exe: [ERROR ID 100] (GrafX.cpp, line 263, BUFF::ThrowImage()) ScenarioType.bmp not found
2018-02-15 17:09:41 meengine.exe: [ERROR ID 486] (engine.cpp, line 869, CheckSer()) There is an error running the application.
Please contact support@matrixgames.com for assistance.
Error Code: 486
2018-02-15 17:19:30 meengine.exe: [ERROR ID 486] (engine.cpp, line 869, CheckSer()) There is an error running the application.
Please contact support@matrixgames.com for assistance.
Error Code: 486
2018-02-15 17:39:52 meengine.exe: [ERROR ID 486] (engine.cpp, line 869, CheckSer()) There is an error running the application.
Please contact support@matrixgames.com for assistance.
Error Code: 486

EDIT - SNIP by Jason Petho




Jason Petho -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/16/2018 3:30:59 PM)

An Error 486 is usually an incorrect serial number.

Contact Matrix support to ensure you are using the correct number.

Jason Petho



Crossroads -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/16/2018 4:35:08 PM)

quote:

ORIGINAL: Jason Petho

An Error 486 is usually an incorrect serial number.

Contact Matrix support to ensure you are using the correct number.

Jason Petho



There's also the My Serial# under My Pages, at your Member page in Matrix Games site. If you have registered your game, that is.

[image]local://upfiles/32195/86BC3C2DC3654231A16D634CF7DC2150.jpg[/image]



VPaulus -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/16/2018 7:51:18 PM)

It's like Jason told, error 486 it's a serial number error.
Or you haven't installed the game using the original game file installer or the issue is related with the lack of admin privileges for running the game.



Spartan7 -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/19/2018 1:27:26 PM)

Sorry to be such a pain here......
Opened a help desk ticket to address the download issue (could not download through the Matrix forum) and the support team sent me a link to the Slitherine site where I was able to successfully download 2.0. However when I attempt to start a game or edit a scenario I get "meengine has stopped working" or the scenario editor has stopped working. This appears to occur on the larger scenarios especially the 8 part Chinese Farm scenarios.
Any thoughts?
Should I spend the additional $50 and order a 2.0 CD?
New W10 machine. This is the only thing I've loaded on the machine.
Thanks



berto -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/19/2018 1:36:46 PM)


At the immediate point of the error(s), what do the first ~10 lines, also the last ~10 lines, of

logs/engine.log
logs/edit.log
logs/error.log [if it exists]

say?

No need to post the entire log files. Just the heads and the tails will do.



Oberst_Klink -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/19/2018 2:12:15 PM)


quote:

ORIGINAL: Spartan7

Sorry to be such a pain here......
Opened a help desk ticket to address the download issue (could not download through the Matrix forum) and the support team sent me a link to the Slitherine site where I was able to successfully download 2.0. However when I attempt to start a game or edit a scenario I get "meengine has stopped working" or the scenario editor has stopped working. This appears to occur on the larger scenarios especially the 8 part Chinese Farm scenarios.
Any thoughts?
Should I spend the additional $50 and order a 2.0 CD?
New W10 machine. This is the only thing I've loaded on the machine.
Thanks

Gary,

I do wonder, what drive/directory did you install the game? Default path or (better in fact) let's say on a non-Windows partition?

Klink, Oberst



Spartan7 -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/19/2018 7:55:32 PM)

logs/engine.log
2018-02-19 15:47:16 meengine.exe: [DEBUG ID 0] (misc.cpp, line 3560, GameFile()) in GameFile(), file is MP226805.bmp
2018-02-19 15:47:16 meengine.exe: [DEBUG ID 0] (misc.cpp, line 3560, GameFile()) in GameFile(), file is XP226805.bmp
2018-02-19 15:47:16 meengine.exe: [DEBUG ID 0] (misc.cpp, line 3560, GameFile()) in GameFile(), file is C:\Matrix Games\graphics\units\3D\XP226805.bmp
2018-02-19 15:47:16 meengine.exe: [INFO ID 1] C:\Matrix Games\graphics\units\3D\XP226805.bmp loaded
2018-02-19 15:47:16 meengine.exe: [DEBUG ID 0] (misc.cpp, line 3560, GameFile()) in GameFile(), file is XP226805.bit
2018-02-19 15:47:16 meengine.exe: [INFO ID 1] in Dib::Dib(), folder 5 not graphics/UI
2018-02-19 15:47:16 meengine.exe: [DEBUG ID 0] (misc.cpp, line 3560, GameFile()) in GameFile(), file is C:\Matrix Games\graphics\units\3D\XP226805.bit
2018-02-19 15:47:16 meengine.exe: [INFO ID 1] in Dib::Dib(), opening C:\Matrix Games\graphics\units\3D\XP226805.bit for reading
2018-02-19 15:47:16 meengine.exe: [TRACE ID 2012] (zoomdr.cpp, line 298, ZoomDraw::LODUnits()) exiting ZoomDraw::LODUnits()
2018-02-19 15:47:16 meengine.exe: [TRACE ID 2012] (zoomdr.cpp, line 1715, ZoomDraw::Startup()) exiting ZoomDraw::Startup()
logs/edit.log
2018-02-19 15:51:59 meedit.exe: [TRACE ID 2012] (geometry.cpp, line 51, Geometry::~Geometry()) exiting Geometry::~Geometry()
2018-02-19 15:51:59 meedit.exe: [TRACE ID 2011] (pdata.cpp, line 35, Pdata::~Pdata()) entering Pdata::~Pdata()
2018-02-19 15:51:59 meedit.exe: [TRACE ID 2012] (pdata.cpp, line 37, Pdata::~Pdata()) exiting Pdata::~Pdata()
2018-02-19 15:51:59 meedit.exe: [TRACE ID 2011] (forces.cpp, line 1027, Forces::~Forces()) entering Forces::~Forces()
2018-02-19 15:51:59 meedit.exe: [TRACE ID 2012] (forces.cpp, line 1033, Forces::~Forces()) exiting Forces::~Forces()
2018-02-19 15:51:59 meedit.exe: [TRACE ID 2011] (map.cpp, line 170, Map::~Map()) entering Map::~Map()
2018-02-19 15:51:59 meedit.exe: [TRACE ID 2011] (map.cpp, line 798, Map::Free()) entering Map::Free()
2018-02-19 15:51:59 meedit.exe: [TRACE ID 2012] (map.cpp, line 811, Map::Free()) exiting Map::Free()
2018-02-19 15:51:59 meedit.exe: [TRACE ID 2012] (map.cpp, line 172, Map::~Map()) exiting Map::~Map()
2018-02-19 15:51:59 meedit.exe: [INFO ID 1] meedit.exe exit
2018-02-19 15:51:59 meedit.exe: [INFO ID 1] in Application::ExitInstance(), exec'ing command: Middle East -i -L1 -A1

Cannot see a logs/error.log

Game is saved to C\Matrix Games

Thanks for the help



Spartan7 -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/19/2018 7:56:16 PM)

The above are the last ten



Spartan7 -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/19/2018 7:59:44 PM)

First ten engine log
2018-02-19 15:47:02 meengine.exe: [INFO ID 1] meengine.exe 2.0 Dec 21 2017 10:58:17 startup
2018-02-19 15:47:02 meengine.exe: [INFO ID 1] _Game is 3
2018-02-19 15:47:02 meengine.exe: [INFO ID 1] _GameHomeDirectory is C:\Matrix Games
2018-02-19 15:47:02 meengine.exe: [INFO ID 1] command line parameters: -W -X -L1 -A1 scenarios\Chinese 1.scn
2018-02-19 15:47:02 meengine.exe: [INFO ID 1] _loglevel is 1, _ai_loglevel is 1
2018-02-19 15:47:02 meengine.exe: [INFO ID 1] _scenario is scenarios\Chinese 1.scn
2018-02-19 15:47:02 meengine.exe: [INFO ID 1] _Scenario is Chinese 1
2018-02-19 15:47:02 meengine.exe: [WARNING ID 100] misc game directory not found
2018-02-19 15:47:02 meengine.exe: [DEBUG ID 0] (misc.cpp, line 3560, GameFile()) in GameFile(), file is sounds.dat
2018-02-19 15:47:02 meengine.exe: [TRACE ID 2011] (lua.cpp, line 84, Lua::LuaInit()) entering Lua::LuaInit()

Edit log. 1st ten
2018-02-19 15:51:10 meedit.exe: [INFO ID 1] meedit.exe 2.0 Dec 21 2017 10:58:14 startup
2018-02-19 15:51:10 meedit.exe: [INFO ID 1] _Game is 3
2018-02-19 15:51:10 meedit.exe: [INFO ID 1] _GameHomeDirectory is C:\Matrix Games
2018-02-19 15:51:10 meedit.exe: [INFO ID 1] command line parameters: -f -X -L1 -A1
2018-02-19 15:51:10 meedit.exe: [INFO ID 1] _loglevel is 1, _ai_loglevel is 1
2018-02-19 15:51:10 meedit.exe: [WARNING ID 100] misc game directory not found
2018-02-19 15:51:10 meedit.exe: [TRACE ID 2011] (lua.cpp, line 84, Lua::LuaInit()) entering Lua::LuaInit()
2018-02-19 15:51:10 meedit.exe: [TRACE ID 2011] (lua.cpp, line 121, Lua::Register()) entering Lua::Register()
2018-02-19 15:51:10 meedit.exe: [TRACE ID 2012] (lua.cpp, line 281, Lua::Register()) exiting Lua::Register()
2018-02-19 15:51:10 meedit.exe: [TRACE ID 2011] (lua.cpp, line 291, Lua::Load()) entering Lua::Load()




berto -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/20/2018 2:34:50 AM)


quote:

ORIGINAL: Spartan7

2018-02-19 15:47:02 meengine.exe: [INFO ID 1] meengine.exe 2.0 Dec 21 2017 10:58:17 startup
2018-02-19 15:47:02 meengine.exe: [INFO ID 1] _Game is 3
2018-02-19 15:47:02 meengine.exe: [INFO ID 1] _GameHomeDirectory is C:\Matrix Games

...

Game is saved to C\Matrix Games

Thanks for the help

It looks like your installation is FUBARed. Why would you install the Middle East game into

C:\Matrix Games

This is the Middle East game, one of many games from the publisher Matrix Games.

Wouldn't it make more sense to install to

C:\Matrix Games\Middle East

or perhaps

C:\Games\Matrix Games\Middle East

I suggest you use the Windows Add/Remove a program facility to uninstall the game, then install to a more sensible place.

After that, let's take this up again from there.



berto -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/20/2018 2:39:02 AM)

quote:

ORIGINAL: Spartan7

... However when I attempt to start a game or edit a scenario I get "meengine has stopped working" or the scenario editor has stopped working. This appears to occur on the larger scenarios especially the 8 part Chinese Farm scenarios.
Any thoughts?

So (and apart from the question of where you installed the game), you are saying that smaller scenarios load and run fine, it's just the larger scenarios that are causing you problems?

What is the amount of RAM on your system? Would it be fair to say that your new Win10 system is low-end?

quote:

Should I spend the additional $50 and order a 2.0 CD?

That will make no difference in your ability to run the game.



Spartan7 -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/20/2018 5:29:59 PM)

System has 8G RAM but I'm upgrading it. Will try downloading to a different directory.
Thanks for all your help. No worries.



Crossroads -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/20/2018 5:53:31 PM)


quote:

ORIGINAL: Spartan7

System has 8G RAM but I'm upgrading it. Will try downloading to a different directory.
Thanks for all your help. No worries.


Good luck! Hopefully installing to another directory such as C:\Matrix Games\Campaign Series Middle East solves your issues.

Based on your DxDiag post you should have the HW to run the game, easily. Of course, with every setup, Your Mileage May Vary, but let us get to that once you have the install in a new, proper location.



Spartan7 -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/20/2018 8:18:05 PM)

Berto, Crossroads;

Uninstalled and reinstalled in new directory as you both suggested. So far, working great.

Many thanks for your help and patience.




Crossroads -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/20/2018 8:40:04 PM)

Good to hear you’re all sorted now [:)]



berto -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (2/20/2018 11:32:47 PM)

[sm=Cool-049.gif]



Spartan7 -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (3/6/2018 1:53:28 AM)

Strange. The problems (meeingine not working, meedit not working) have returned. They appear so far on the Chinese Farm Scenarios 2 thru 8, but Scenario 1 seems fine.



Crossroads -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (3/6/2018 10:48:25 AM)


quote:

ORIGINAL: Spartan7

Strange. The problems (meeingine not working, meedit not working) have returned. They appear so far on the Chinese Farm Scenarios 2 thru 8, but Scenario 1 seems fine.


Sorry to hear about your problem resurfacing. I can only confirm all these scenarios work on my install.

We've delivered the 2.01 UPDATE package to Matrix Games, so hopefully it is not too far away, and maybe it would help in these issues you are seeing as well.



Spartan7 -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (3/6/2018 9:12:03 PM)

Crossroads;
As ever I appreciate your patience and guidance. I may be on to something.
I saved my current download to an external hard drive as I was making extensive changes to the OOB for the 8 part Chinese Farm scenarios. The 8 part series has a single OOB (Chinese.org).
I did a full uninstall on my C Drive and re-downloaded V2.0 to my C Drive C:Matrix Games\Campaign Series Middle East per the previous help you and berto provided. Now every scenario works fine.
I suspect that somehow my changes to the OOB caused scenarios 2 thru 8 to have a problem because of the common OOB. I vaguely remember having an issue with Tillers Campaign series in deleting units in the OOB resulted in scenarios not working.
Anyway, I think I need to be more careful in deleting items in modding the OOB. In the past I would put an "X" in front of the unit rather than deleting in from the OOB as a reminder not to put it on the map.
Not asking you to do anything. Just need to sharpen my skills on creating new OOBs and linking them to scenarios. Thanks again for the help.



Jason Petho -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (3/6/2018 9:16:58 PM)

I highly recommend becoming familiar with the JSGME tool that is provided in the installation and how it works with modding. I believe it is explained in the manual how to use it. There is also a video that shows you how to turn on and off various mods.

If you do edits to your OOB's, do it as a MOD, then add it when you wish.

No need to have multiple installations of your core game.



Jason Petho -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (3/6/2018 9:18:26 PM)

Section 16.3 cover the JSGME tool



Jason Petho -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (3/6/2018 9:19:15 PM)

JSGME Video Link



Crossroads -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (3/7/2018 1:39:42 PM)

^^ What Jason just said!



Crossroads -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (3/7/2018 1:43:25 PM)

Here's a link to an earlier Developer Diary I did for JTCS covering how to mod OoB files, so a different game, but the basics apply here as well.

1. Create the mod directory, 2. Add the OoB files you want to change there, 3. Edit the said files, 4. Activate the mod to see them., 5. Deactivate the mod to go back to stock install.



giffin -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (4/30/2018 3:52:23 AM)

Hi Guys, Went to my CSM Icon to open the game and hit the check for newer updates. I updated to new version 2.01. Now when I try to start game I get Pop Up "Failed to Extract Project File to Memory" Cant start game at all. Thank you in advance for Help.

Here is my Log Engine file 1st few lines in beginning and last lines:

2018-04-29 20:30:28 me.exe: [INFO ID 1] me.exe 1.02 startup
2018-04-29 20:30:28 me.exe: [INFO ID 1] _Game is 3
2018-04-29 20:30:28 me.exe: [INFO ID 1] _GameHomeDirectory is C:\Matrix Games\Campaign Series Middle East
2018-04-29 20:30:28 me.exe: [INFO ID 1] command line parameters:
2018-04-29 20:30:28 me.exe: [INFO ID 1] _loglevel is 1, _ai_loglevel is 1
2018-04-29 20:30:28 me.exe: [WARNING ID 100] manuals game directory not found
2018-04-29 20:30:28 me.exe: [WARNING ID 100] misc game directory not found
2018-04-29 20:30:28 me.exe: [INFO ID 1] in SoundsDat::SoundsDat(), opening data\sounds.dat for reading
2018-04-29 20:30:28 me.exe: [TRACE ID 1100] (map.cpp, line 40, Map::Map()) entering Map::Map()
2018-04-29 20:30:28 me.exe: [TRACE ID 1100] (map.cpp, line 592, Map::Allocate()) entering Map::Allocate()
2018-04-29 20:30:28 me.exe: [TRACE ID 1101] (map.cpp, line 623, Map::Allocate()) exiting Map::Allocate()
2018-04-29 20:30:28 me.exe: [TRACE ID 1101] (map.cpp, line 52, Map::Map()) exiting Map::Map()
-04-29 20:30:32 me.exe: [DEBUG ID 0] (misc.cpp, line 2065, GameFile()) in GameFile(), file is empty string
2018-04-29 20:30:32 me.exe: [DEBUG ID 0] (misc.cpp, line 2065, GameFile()) in GameFile(), file is empty string
2018-04-29 20:30:32 me.exe: [DEBUG ID 0] (misc.cpp, line 2065, GameFile()) in GameFile(), file is empty string
2018-04-29 20:30:32 me.exe: [DEBUG ID 0] (misc.cpp, line 2065, GameFile()) in GameFile(), file is empty string
2018-04-29 20:30:32 me.exe: [DEBUG ID 0] (misc.cpp, line 2065, GameFile()) in GameFile(), file is empty string
2018-04-29 20:30:32 me.exe: [DEBUG ID 0] (misc.cpp, line 2065, GameFile()) in GameFile(), file is empty string
2018-04-29 20:30:32 me.exe: [DEBUG ID 0] (misc.cpp, line 2065, GameFile()) in GameFile(), file is empty string
2018-04-29 20:30:32 me.exe: [DEBUG ID 0] (misc.cpp, line 2065, GameFile()) in GameFile(), file is empty string
2018-04-29 20:30:32 me.exe: [TRACE ID 1100] (filem.cpp, line 505, FileMenu::CheckStartup()) entering FileMenu::CheckStartup()
2018-04-29 20:30:32 me.exe: [TRACE ID 1100] (filem.cpp, line 666, FileMenu::OnFileNew()) entering FileMenu::OnFileNew()
2018-04-29 20:30:32 me.exe: [TRACE ID 1100] (filem.cpp, line 307, FileMenu::NewData()) entering FileMenu::NewData()
2018-04-29 20:30:36 me.exe: [TRACE ID 1101] (filem.cpp, line 346, FileMenu::NewData()) exiting FileMenu::NewData()
2018-04-29 20:30:36 me.exe: [TRACE ID 1101] (filem.cpp, line 681, FileMenu::OnFileNew()) exiting FileMenu::OnFileNew()
2018-04-29 20:30:36 me.exe: [TRACE ID 1101] (filem.cpp, line 544, FileMenu::CheckStartup()) exiting FileMenu::CheckStartup()
2018-04-29 20:30:41 me.exe: [TRACE ID 1100] (map.cpp, line 634, Map::Free()) entering Map::Free()
2018-04-29 20:30:41 me.exe: [TRACE ID 1101] (map.cpp, line 655, Map::Free()) exiting Map::Free()
2018-04-29 20:30:42 me.exe: [INFO ID 1] me.exe exit






Jason Petho -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (4/30/2018 1:26:55 PM)

Unfortunately, the 2.01 UPDATE is not cumulative, so you will need to unistall 1.02, install 2.00 and then use the UPDATE feature to install 2.01



giffin -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (4/30/2018 10:22:09 PM)

Thank you I deleted all files and uploaded the new 2.01 game.



Jason Petho -> RE: Campaign Series Middle East 2.00 SUPPORT THREAD (4/30/2018 10:32:55 PM)

Good to hear, giffin!



Page: [1] 2   next >   >>

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
2.015625