RE: Tacview 3D shapes thread - Share your custom shapes here

RE: Tacview 3D shapes thread - Share your custom shapes here (Full Version)

All Forums >> [New Releases from Matrix Games] >> Command: Modern Operations series >> Mods and Scenarios

Message

BLiboy -> RE: Tacview 3D shapes thread - Share your custom shapes here (4/19/2020 3:19:32 PM)
Hi, Hope everyone is ok. Here are the following sub (some of them made from scratch for others just updated from existing). Succeeded to keep each .obj below 1Mo. with some details (prop, flank array…) Watercraft.Type 212 Watercraft.Type 214 Watercraft.Collins Watercraft.Scorpene Watercraft.Agosta 70 Watercraft.Agosta 90B Watercraft.Rubis Watercraft.Suffren Watercraft.Triomphant Watercraft.ImprovedLA Watercraft.LA Watercraft.Ohio Watercraft.Permit Watercraft.Virginia Watercraft.Dolphin I Watercraft.Dolphin II Watercraft.Gotland Watercraft.Project 633 (class name Romeo) Watercraft.Project 641B (class name Tango) Watercraft.Project 667A (class name Yankee) Watercraft.Project 667BDR (class name Delta III) Watercraft.Project 667BDRM (class name Delta IV) Watercraft.Project 670 (class name Charlie I) Watercraft.Project 670M (class name Charlie II) Watercraft.Project 671 (class name Victor I) Watercraft.Project 671RT (class name Victor II) Watercraft.Project 671RTM (class name Victor III) Watercraft.Project 705 (class name Alfa) Watercraft.Project 877 (class name Kilo) Watercraft.Project 945 (class name Sierra I) Watercraft.Project 945A (class name Sierra II) Watercraft.Project 955A (class name Borei) Watercraft.Project 971M (class name Akula III) Watercraft.Project 971U (class name Akula II) Copy Watercraft."class name" inside "Command - Modern Operations\Resources\Tacview\Data\Meshes" Open Associations_DB3000.xls, search for the class name and replace the mesh name with Watercraft."class name" With some pictures https://ibb.co/26jM653 https://ibb.co/5cygMQY https://ibb.co/VDm56mK https://ibb.co/HYWP5h7 https://ibb.co/xLHR60K https://ibb.co/Y7jvwQX https://ibb.co/Hxt4yqz Enjoy

Dimitris -> RE: Tacview 3D shapes thread - Share your custom shapes here (4/19/2020 3:56:46 PM)
Impressive, thanks!

pclaurent -> RE: Tacview 3D shapes thread - Share your custom shapes here (4/20/2020 12:08:24 PM)
Great job! I had a quick look at your French submarines, and they seem perfect. You could just add the first version Rubis (with a straight bow) or use mine if you want. I hope that all these magnificent models will be included in next release.

Dimitris -> RE: Tacview 3D shapes thread - Share your custom shapes here (4/21/2020 6:40:24 AM)
Yes, we try to include as many of these objects as possible.

pclaurent -> RE: Tacview 3D shapes thread - Share your custom shapes here (4/22/2020 7:25:44 PM)
FYI, BLiboy's model for Rubis (which is mod2, i.e. 1991- Rubis) is definitely better than mine [sm=happy0065.gif]. So for next release I suggest to replace Watercraft.Rubis-Mod2.obj with his Watercraft.Rubis.obj. Sorry for the confusion, but our 2 projects emerged almost at the same time.

FTBSS -> RE: Tacview 3D shapes thread - Share your custom shapes here (4/23/2020 4:01:23 AM)
Was wondering if you guys can make a model for the F-24 NATF combining F-22 with F-14 swing wing?

Dimitris -> RE: Tacview 3D shapes thread - Share your custom shapes here (4/27/2020 8:52:38 AM)
quote: ORIGINAL: pclaurent FYI, BLiboy's model for Rubis (which is mod2, i.e. 1991- Rubis) is definitely better than mine [sm=happy0065.gif]. So for next release I suggest to replace Watercraft.Rubis-Mod2.obj with his Watercraft.Rubis.obj. Sorry for the confusion, but our 2 projects emerged almost at the same time. Done [:)]

pclaurent -> RE: Tacview 3D shapes thread - Share your custom shapes here (4/28/2020 9:36:15 AM)
quote: ORIGINAL: FTBSS Was wondering if you guys can make a model for the F-24 NATF combining F-22 with F-14 swing wing? As far as I can see, F24-NATF can be represented as an F14 with rear tails somewhow tilted. You could have a look at Tinkercad (online free 3D rendering tool) and do the mod...

BLiboy -> RE: Tacview 3D shapes thread - Share your custom shapes here (5/5/2020 2:45:31 PM)
Hi everybody, I also worked / reworked the following: Watercraft.Project613.obj (Wiskey class) Watercraft.Project641.obj (Foxtrot class) Watercraft.Project675.obj (Echo II class) Watercraft.Project941.obj (Typhoon class) Watercraft.TR1700.obj (ARA Santa Cruz) And built some chinese SS-SSN-SSGN: Watercraft.Type039.obj (Song class) Watercraft.Type039A.obj (Yuan class) Watercraft.Type039C.obj (Yuan class / tapered design) Watercraft.Type091.obj (Han class) Watercraft.Type092.obj (Xia class) Watercraft.Type093.obj (Shang-I class) Watercraft.Type093A.obj (Shang-II class / tapered design) Watercraft.Type093B.obj (Shang-III class / VLS) Still miss some SSN but i may work on Indian / Jap / UK subs now. Feel free to add them to your HD - Matrix Games\Command Modern Operations\Resources\Tacview\Data\Meshes Enjoy [img]https://i.ibb.co/TWhqsHG/08.jpg[/img] [img]https://i.ibb.co/hmn9q7y/09.jpg[/img] [img]https://i.ibb.co/MSBmsrZ/11.jpg[/img]

Lucas.F -> RE: Tacview 3D shapes thread - Share your custom shapes here (11/12/2020 8:26:43 PM)
Hello everyone.i am new in the forum. Finalizing a couple of Brazilian 3D models for use in CMANO. Is there a way to add the range radius for AAA ingame? Embraer R99A Embraer R99B SABER M60 Radar FlakPanzer GEPARD Oerlikon with the Skyguard

Dimitris -> RE: Tacview 3D shapes thread - Share your custom shapes here (12/31/2020 8:10:56 PM)
quote: ORIGINAL: Lucas.F Hello everyone.i am new in the forum. Finalizing a couple of Brazilian 3D models for use in CMANO. Is there a way to add the range radius for AAA ingame? Embraer R99A Embraer R99B SABER M60 Radar FlakPanzer GEPARD Oerlikon with the Skyguard Hello and welcome, We do not recommend using Tacview's "range bubbles" when using with Command, because the range figures are auto-estimated from Tacview rather than actually provided by Command.

BLiboy -> RE: Tacview 3D shapes thread - Share your custom shapes here (3/4/2021 11:57:51 PM)
Hi, One of my last models there. I focused on commercial vessels & tankers to provide more traffic variation. Watercraft.CCL135Kt / Cruise Line ship [img]https://i.ibb.co/T8pHT3N/Watercraft-CCL135-Kt.jpg[/img] Watercraft.CFB23&35 / fishing boat [img]https://i.ibb.co/PW6TjZP/Watercraft-CFB23-35.jpg[/img] Other.Fishschool [img]https://i.ibb.co/Jc53WY9/Other-Fishschool.jpg[/img] Feel free to add to meshes repertory More will follow B.

BLiboy -> RE: Tacview 3D shapes thread - Share your custom shapes here (3/5/2021 11:21:10 AM)
Next commercial units: Watercraft.CCV-AllFeeder for: -Commercial Container Vessel - Small Feeder [750 TEU, 9,500t DWT] -Commercial Container Vessel - Small Feeder [100 TEU, 5,750t DWT] -Commercial Container Vessel - Feeder [1,600 TEU, 20,000t DWT] -Commercial Container Vessel - Feedermax [3,000 TEU, 30,000t DWT] -Commercial Container Vessel - Panamax [4,500 TEU, 65,000t DWT] [img]https://i.ibb.co/G7gPrNY/Watercraft-CCV-All-Feeder.jpg[/img] Watercraft.CCV-UL.obj for: -Commercial Container Vessel - Post Panamax [9,500 TEU, 105,000t DWT] -Commercial Container Vessel - New Panamax [13,500 TEU, 155,000t DWT] -Commercial Container Vessel - Ultra Large [15,000 TEU, 160,000t DWT] [img]https://i.ibb.co/Bw0tTMj/Watercraft-CCV-UL.jpg[/img] Watercraft.CDBC_S-H&SupraSize for: -Commercial Dry-Bulk Carrier - Handymax Size [45,000t DWT] -Commercial Dry-Bulk Carrier - Handysize [35,000t DWT] -Commercial Dry-Bulk Carrier - Panamax Size [75,000t DWT] -Commercial Dry-Bulk Carrier - Small Handysize [25,000t DWT, Helo Deck] -Commercial Dry-Bulk Carrier - Small Handysize [25,000t DWT] -Commercial Dry-Bulk Carrier - Supramax Size [55,000t DWT] [img]https://i.ibb.co/hBFRThk/Watercraft-CDBC-S-H-Supra-Size.jpg[/img] Watercraft.CDBC_VL&CapSize.obj for: -Commercial Dry-Bulk Carrier - Capesize Size [150,000t DWT] -Commercial Dry-Bulk Carrier - Very Large Size [200,000t DWT] [img]https://i.ibb.co/y00ZbdQ/Watercraft-CDBC-VL-Cap-Size.jpg[/img] Watercraft.CT.obj for: -Commercial Tanker - General Purpose [20,000t DWT] -Commercial Tanker - Medium Range [40,000t DWT] -Commercial Tanker - Large Range 1 [75,000t DWT] -Commercial Tanker - Large Range 2 [150,000t DWT] [img]https://i.ibb.co/d7HwVGk/Watercraft-CT.jpg[/img] Watercraft.CT-ULCC-VLCC.obj for: -Commercial Tanker - Very Large Crude Carrier [300,000t DWT] -Commercial Tanker - Ultra Large Crude Carrier [420,000t DWT] [img]https://i.ibb.co/HD1tCxJ/Watercraft-CT-ULCC-VLCC.jpg[/img] Watercraft.CT-LNG_LPG.obj for: Commercial LNG/LPG Tanker [18,000t DWT] [img]https://i.ibb.co/kyGvfTy/Watercraft-CT-LNG-LPG.jpg[/img] Thanks B.

Dimitris -> RE: Tacview 3D shapes thread - Share your custom shapes here (3/5/2021 11:23:11 AM)
Very nice, thanks!

BLiboy -> RE: Tacview 3D shapes thread - Share your custom shapes here (3/5/2021 11:32:41 AM)
And Some military here: Watercraft.Astute.obj (update) Watercraft.Suffren.obj (update) Watercraft.Project885M.obj (update) Watercraft.Trafalgar.obj (update) Watercraft.Lafayette.obj (new) [img]https://i.ibb.co/Nr3sNsS/Watercraft-Lafayette.jpg[/img] Watercraft.R91.obj (new) [img]https://i.ibb.co/Sm6jVh1/Watercraft-R91.jpg[/img] Watercraft.FREMM.obj (new) [img]https://i.ibb.co/Bs4ZV9g/Watercraft-FREMM.jpg[/img] Watercraft.VanguardSSBN.obj (new) [img]https://i.ibb.co/7XmxZ1B/Watercraft-Vanguard-SSBN.jpg[/img] cheers B.

Dimitris -> RE: Tacview 3D shapes thread - Share your custom shapes here (3/5/2021 4:26:10 PM)
quote: ORIGINAL: BLiboy Next commercial units: Watercraft.CCV-AllFeeder for: -Commercial Container Vessel - Small Feeder [750 TEU, 9,500t DWT] -Commercial Container Vessel - Small Feeder [100 TEU, 5,750t DWT] -Commercial Container Vessel - Feeder [1,600 TEU, 20,000t DWT] -Commercial Container Vessel - Feedermax [3,000 TEU, 30,000t DWT] -Commercial Container Vessel - Panamax [4,500 TEU, 65,000t DWT] [img]https://i.ibb.co/G7gPrNY/Watercraft-CCV-All-Feeder.jpg[/img] Watercraft.CCV-UL.obj for: -Commercial Container Vessel - Post Panamax [9,500 TEU, 105,000t DWT] -Commercial Container Vessel - New Panamax [13,500 TEU, 155,000t DWT] -Commercial Container Vessel - Ultra Large [15,000 TEU, 160,000t DWT] [img]https://i.ibb.co/Bw0tTMj/Watercraft-CCV-UL.jpg[/img] Watercraft.CDBC_S-H&SupraSize for: -Commercial Dry-Bulk Carrier - Handymax Size [45,000t DWT] -Commercial Dry-Bulk Carrier - Handysize [35,000t DWT] -Commercial Dry-Bulk Carrier - Panamax Size [75,000t DWT] -Commercial Dry-Bulk Carrier - Small Handysize [25,000t DWT, Helo Deck] -Commercial Dry-Bulk Carrier - Small Handysize [25,000t DWT] -Commercial Dry-Bulk Carrier - Supramax Size [55,000t DWT] [img]https://i.ibb.co/hBFRThk/Watercraft-CDBC-S-H-Supra-Size.jpg[/img] Watercraft.CDBC_VL&CapSize.obj for: -Commercial Dry-Bulk Carrier - Capesize Size [150,000t DWT] -Commercial Dry-Bulk Carrier - Very Large Size [200,000t DWT] [img]https://i.ibb.co/y00ZbdQ/Watercraft-CDBC-VL-Cap-Size.jpg[/img] Watercraft.CT.obj for: -Commercial Tanker - General Purpose [20,000t DWT] -Commercial Tanker - Medium Range [40,000t DWT] -Commercial Tanker - Large Range 1 [75,000t DWT] -Commercial Tanker - Large Range 2 [150,000t DWT] [img]https://i.ibb.co/d7HwVGk/Watercraft-CT.jpg[/img] Watercraft.CT-ULCC-VLCC.obj for: -Commercial Tanker - Very Large Crude Carrier [300,000t DWT] -Commercial Tanker - Ultra Large Crude Carrier [420,000t DWT] [img]https://i.ibb.co/HD1tCxJ/Watercraft-CT-ULCC-VLCC.jpg[/img] Watercraft.CT-LNG_LPG.obj for: Commercial LNG/LPG Tanker [18,000t DWT] [img]https://i.ibb.co/kyGvfTy/Watercraft-CT-LNG-LPG.jpg[/img] Thanks B. Did you forget to attach the file for those, by any chance?

BLiboy -> RE: Tacview 3D shapes thread - Share your custom shapes here (3/5/2021 4:45:08 PM)
Maybe...[8\|]

Dimitris -> RE: Tacview 3D shapes thread - Share your custom shapes here (3/5/2021 5:29:49 PM)
[sm=00000436.gif]

BLiboy -> RE: Tacview 3D shapes thread - Share your custom shapes here (5/1/2021 4:34:02 PM)
Hi, Some civilians and Horizon class frigate + SAM (the default scale of the units was too big) & Mirage F1 upgrade. AntiAircraft.SAM.SA-17 AntiAircraft.SAM.SA-6 AntiAircraft.SAM.SA-2 FixedWing.Mirage F1 [img]https://i.ibb.co/FmkfCVM/F1.jpg[/img] Watercraft.CMY13 for Civilian Motor Yacht [13m] long Watercraft.CMY38 for Civilian Motor Yacht [38m] long [img]https://i.ibb.co/syB7tr7/CMY13.jpg[/img] [img]https://i.ibb.co/rZrvCvc/CMY38.jpg[/img] Watercraft.Jetski Watercraft.CSB7 for Civilian Small boat [7m] Watercraft.Speedboat for Civilian Go Fast [13m] [img]https://i.ibb.co/gVn8Rz4/Civilians.jpg[/img] Watercraft.Horizon For french Forbin & Italian Andrea Doria units [img]https://i.ibb.co/84xJVrR/Watercraft-Horizon.jpg[/img] B.

Dimitris -> RE: Tacview 3D shapes thread - Share your custom shapes here (5/2/2021 7:02:21 AM)
Thanks again!

BLiboy -> RE: Tacview 3D shapes thread - Share your custom shapes here (7/4/2021 8:53:41 AM)
Hi Dimitris, Is there's a way to get the last clean Associations_DB3000.xls file ? Mine is a little bit messy because of back & forth work on shapes. Thanks !

Dimitris -> RE: Tacview 3D shapes thread - Share your custom shapes here (7/4/2021 8:56:59 AM)
Certainly, see attached.

BLiboy -> RE: Tacview 3D shapes thread - Share your custom shapes here (7/10/2021 7:26:16 PM)
If just realized i could have sent the xls. format updated with each pack. It would have helped... Some more units there: NEW AIR: Airbus A300 beluga Airbus A340 Airbus A380 Antonov-12 ATR42 Boeing747 Boeing767 Boeing787 C5 Galaxy Cessna337 Concorde Embraer190 F-16F/I/V Hawk JH-7 Kawasaki P-1 RC135 Super-Etendard TU-204 U-2 [img]https://i.ibb.co/McszTnW/A340.jpg[/img] [img]https://i.ibb.co/tJMTNRb/A300.jpg[/img] [img]https://i.ibb.co/rF31Hdg/A380.jpg[/img] [img]https://i.ibb.co/DgNCHY2/An12.jpg[/img] [img]https://i.ibb.co/TLS94bp/ATR42.jpg[/img] [img]https://i.ibb.co/Hgdv1HV/B747.jpg[/img] [img]https://i.ibb.co/B4KhKXP/B767.jpg[/img] [img]https://i.ibb.co/Pg4zHG1/B787.jpg[/img] [img]https://i.ibb.co/Dwr8Ngw/C5.jpg[/img] [img]https://i.ibb.co/wKSRHwD/C337.jpg[/img] [img]https://i.ibb.co/bJ3fpbn/Conc.jpg[/img] [img]https://i.ibb.co/NrGLHQc/Emb.jpg[/img] [img]https://i.ibb.co/DY4PKLQ/F16FIV.jpg[/img] [img]https://i.ibb.co/LtKk984/Hawk.jpg[/img] [img]https://i.ibb.co/WKSCYL7/JH7.jpg[/img] [img]https://i.ibb.co/qJTc92N/P1.jpg[/img] [img]https://i.ibb.co/MBsDJWV/RC135.jpg[/img] [img]https://i.ibb.co/nLxr6gZ/SupET.jpg[/img] [img]https://i.ibb.co/W35DLCY/TU204.jpg[/img] [img]https://i.ibb.co/XbjsNnN/U2.jpg[/img] UPDATED AIR: J-20 JAS39 (wrong scale) Rafale [img]https://i.ibb.co/sWTr3YJ/J20.jpg[/img] [img]https://i.ibb.co/q9GLmyk/JAS39.jpg[/img] [img]https://i.ibb.co/yygysjw/Raf.jpg[/img] NEW NAVAL: Type054 Jiangkai I Type054A Jiangkai II Type055 Renhai [img]https://i.ibb.co/ZYh79yN/T054.jpg[/img] [img]https://i.ibb.co/VHt5dqp/T054A.jpg[/img] [img]https://i.ibb.co/Zgjc3r9/T055.jpg[/img] Cheers B.

BLiboy -> RE: Tacview 3D shapes thread - Share your custom shapes here (7/10/2021 7:31:20 PM)
With the files maybe ? [>:]

boogabooga -> RE: Tacview 3D shapes thread - Share your custom shapes here (7/11/2021 2:35:25 AM)
Wil these make it into the beta releases? I am not sure where these go in Associations_DB3000.xls.

Dimitris -> RE: Tacview 3D shapes thread - Share your custom shapes here (7/12/2021 11:34:45 AM)
quote: ORIGINAL: BLiboy With the files maybe ? [>:] Thanks again!

Dimitris -> RE: Tacview 3D shapes thread - Share your custom shapes here (7/12/2021 11:35:25 AM)
quote: ORIGINAL: boogabooga Wil these make it into the beta releases? I am not sure where these go in Associations_DB3000.xls. Yes, they will be included in one of the forthcoming updates together with appropriate association files.

boogabooga -> RE: Tacview 3D shapes thread - Share your custom shapes here (7/13/2021 1:52:18 AM)
The CWDB association file is missing some models that are available and being used by DB3K. Examples include the F-105 and the Saab Draken. Also, the airbase model used by DB3k seems more appropriate than the pylon model that is used by the CWDB. I could post my edited CWDB association file if there is interest.

CV60 -> RE: Tacview 3D shapes thread - Share your custom shapes here (7/13/2021 11:17:01 AM)
quote: ORIGINAL: boogabooga The CWDB association file is missing some models that are available and being used by DB3K. Examples include the F-105 and the Saab Draken. Also, the airbase model used by DB3k seems more appropriate than the pylon model that is used by the CWDB. I could post my edited CWDB association file if there is interest. I would be interested, but probably you should coordinate with Dimitris. If I understand it correctly, the 3D models get updated occasionally via game updates. If that is correct, then your hard work may end up being over written by a game update.

dadizonline -> RE: Tacview 3D shapes thread - Share your custom shapes here (10/12/2021 9:53:08 AM)
Are they working on indian helicopters?

Page: << < prev 1 [2] 3 next > >>

Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

4.0625