|
cfulbright -> RE: How do I adjust waypoints when planning raid? (6/30/2021 5:33:12 PM)
|
To change the waypoints for both outbound and returning:
1. First set your target hex AND your staging base. If you change waypoints and then reset either of the first two, it will undo your custom waypoints.
2. Left-click on the current waypoint, and the top of the two diamonds will turn red.
3. Left-click on the desired hex for that waypoint.
To change returning waypoints:
1. RIGHT-click on an existing waypoint. If you do this correctly, the BOTTOM of the two diamonds will turn red.
2. LEFT-click on the desired hex for that waypoint.
It takes a lot of practice to do that second type of change, because the impulse is to do a left-click on the first step, or repeat the right-click for the second step.
Cary
[image]local://upfiles/9101/BBA4CD6950E54FED8202437894529BF5.jpg[/image]
|
|
|
|
