If I rail two PD together I get less SMP than one at a time (Full Version)

All Forums >> [New Releases from Matrix Games] >> Gary Grigsby's War in the East 2



Message

king171717 -> If I rail two PD together I get less SMP than one at a time (12/23/2021 2:02:33 AM)

If I rail two PD together I get less SMP than one at a time. Shouldnt it be the same value of SMP left over. I am just wondering.
Here if I send one at a time on same turn.

[image]local://upfiles/54280/C21FBE772A5C4F6BA97561BA5C308021.jpg[/image]



king171717 -> RE: If I rail two PD together I get less SMP than one at a time (12/23/2021 2:03:15 AM)

Rail together at the same time.

[image]local://upfiles/54280/1340A7D135A7490E99BA2E4DFC56ED10.jpg[/image]



RedLancer -> RE: If I rail two PD together I get less SMP than one at a time (12/23/2021 5:59:48 AM)

Congestion....



king171717 -> RE: If I rail two PD together I get less SMP than one at a time (12/23/2021 2:08:53 PM)


quote:

ORIGINAL: RedLancer

Congestion....


So your saying never combine two units at the same time to rail.

As railing one and then the other on the same turn uses less SMP.




loki100 -> RE: If I rail two PD together I get less SMP than one at a time (12/23/2021 2:31:29 PM)


quote:

ORIGINAL: king171717


quote:

ORIGINAL: RedLancer

Congestion....


So your saying never combine two units at the same time to rail.

As railing one and then the other on the same turn uses less SMP.




if you move them as a stack you force them over exactly the same set of rail hexes, if you move them separately the second one will find a variant of the route, perhaps with less existing usage.

if there is only one route it makes no difference but even in say August 1941 two units at Berlin can find different routes to the border, even if from the 1941 border to a given part of the front there is only one viable line

or, yes, tend to move them one by one if you can



king171717 -> RE: If I rail two PD together I get less SMP than one at a time (12/23/2021 3:14:00 PM)


quote:

ORIGINAL: loki100


quote:

ORIGINAL: king171717


quote:

ORIGINAL: RedLancer

Congestion....


So your saying never combine two units at the same time to rail.

As railing one and then the other on the same turn uses less SMP.




if you move them as a stack you force them over exactly the same set of rail hexes, if you move them separately the second one will find a variant of the route, perhaps with less existing usage.

if there is only one route it makes no difference but even in say August 1941 two units at Berlin can find different routes to the border, even if from the 1941 border to a given part of the front there is only one viable line

or, yes, tend to move them one by one if you can


These are rail over the exact same line as there is only one way to go.

I guess what i am getting at, is they should both be the same SMP value but they arent.



king171717 -> RE: If I rail two PD together I get less SMP than one at a time (12/23/2021 3:19:36 PM)

However, trying this with two MD units, they are the same SMP if rail together or one at a time.





king171717 -> RE: If I rail two PD together I get less SMP than one at a time (12/23/2021 3:52:24 PM)

Maybe this will help

Just one selected

[image]local://upfiles/54280/151A459813904058AC42433EF2E2F9F9.jpg[/image]



king171717 -> RE: If I rail two PD together I get less SMP than one at a time (12/23/2021 3:53:18 PM)

Both Selected

The rail load value changes with two, which it doesnt if i selected two MD to rail

[image]local://upfiles/54280/6DCE92D9FE40493F8332EA4A62744E35.jpg[/image]



Joel Billings -> RE: If I rail two PD together I get less SMP than one at a time (12/23/2021 4:15:21 PM)

Could you try moving them one at a time in a different order. I can't explain it, and it a quick few tests I ran they always matched, so I will need a save that I can run to see what's happening. The divisions are big enough that one moving down the track could cause the cost to go up. If one division was bigger than the other and happened to trigger some hexes to go to a higher cost, it might matter which one moves first. That's the only thing I can think of.



king171717 -> RE: If I rail two PD together I get less SMP than one at a time (12/23/2021 4:19:55 PM)

quote:

ORIGINAL: Joel Billings

Could you try moving them one at a time in a different order. I can't explain it, and it a quick few tests I ran they always matched, so I will need a save that I can run to see what's happening. The divisions are big enough that one moving down the track could cause the cost to go up. If one division was bigger than the other and happened to trigger some hexes to go to a higher cost, it might matter which one moves first. That's the only thing I can think of.


I think the problem is it changing the rail load value when two are selected. Which normally doesnt happen. I will share a save game.

File is too large, so I shared it in tech support. Thanks Joel for looking into it.



GibsonPete -> RE: If I rail two PD together I get less SMP than one at a time (12/23/2021 6:43:00 PM)

So, Joel is hinting at what my wife tells me... size matters. [:)]



Page: [1]

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
3.859375