Unit List selected highlights (Full Version)

All Forums >> [New Releases from Matrix Games] >> Campaign Series: Vietnam



Message


berto -> Unit List selected highlights (1/24/2022 1:35:11 PM)


Augmented Unit List selected unit highlights. In the screenshot, where the 2nd and 4th units are selected. (Apart from brightening the frame, note too the darkened unit ring for the unselected units.)

Available in CSVN 1.01 (and thereafter).

[image]local://upfiles/5869/789E89EB87D444B79F89928E1D2A6E98.jpg[/image]




carll11 -> RE: Unit List selected highlights (1/24/2022 4:20:04 PM)

Thx Berto...I must confess I was about to write up a 'review' on my game experiences but didn't want to add any negatives due to mechanics, and this is one of them I would have posted in section today;

IMHO the issue isn't what 'highlight' the unit portrays in the unit list when its selected, what it has now ( the banner with name lights up) is fine with me, its the Lag between selection and highlighting both ON the map and, the UL.

I have the game running about as fast as its going to get for me on a laptop, ( 3 gb quad core), in admin mode, no scrolling, transparent labels,prompt for scenario off, no sound at all etc. but the Lag re;selecting a unit using the UL is 5-10 seconds, further, it takes that long for it to highlight in the UL after I have selected it on the map as well.........on the map when I point the hotspot on a unit(s), I have to click multiple times to even display in the hex, so I CAN select one...




devoncop -> RE: Unit List selected highlights (1/24/2022 4:35:47 PM)

Thats interesting Carl.

I dont get those lags at all.

I assume your laptop meets minimum specs for the game ?




Jason Petho -> RE: Unit List selected highlights (1/24/2022 5:59:42 PM)

quote:

but the Lag re;selecting a unit using the UL is 5-10 seconds,


Yes, that is an oddity indeed. Even in my videos the selections are instant.




berto -> RE: Unit List selected highlights (1/24/2022 7:00:14 PM)

quote:

ORIGINAL: carll11

IMHO the issue isn't what 'highlight' the unit portrays in the unit list when its selected, what it has now ( the banner with name lights up) is fine with me, its the Lag between selection and highlighting both ON the map and, the UL.

I have the game running about as fast as its going to get for me on a laptop, ( 3 gb quad core), in admin mode, no scrolling, transparent labels,prompt for scenario off, no sound at all etc. but the Lag re;selecting a unit using the UL is 5-10 seconds, further, it takes that long for it to highlight in the UL after I have selected it on the map as well.........on the map when I point the hotspot on a unit(s), I have to click multiple times to even display in the hex, so I CAN select one...

That sounds like one of those (few) cases where your system doesn't like the game for some reason. For most players, the game is not that way at all.

I thought you had reported a fix for these issues here:

https://www.matrixgames.com/forums/tm.asp?m=5132256

Very strange that it doesn't work right, then it does, then it doesn't again.

Is your anti-virus software perhaps messing with the game? I have experienced instances of that. (Not with our game but with other software.)

Again, you had best rely on Matrix/Slitherine Tech Support to fix this permanently for you.




carll11 -> RE: Unit List selected highlights (1/24/2022 7:24:30 PM)


quote:

ORIGINAL: berto

quote:

ORIGINAL: carll11

IMHO the issue isn't what 'highlight' the unit portrays in the unit list when its selected, what it has now ( the banner with name lights up) is fine with me, its the Lag between selection and highlighting both ON the map and, the UL.

I have the game running about as fast as its going to get for me on a laptop, ( 3 gb quad core), in admin mode, no scrolling, transparent labels,prompt for scenario off, no sound at all etc. but the Lag re;selecting a unit using the UL is 5-10 seconds, further, it takes that long for it to highlight in the UL after I have selected it on the map as well.........on the map when I point the hotspot on a unit(s), I have to click multiple times to even display in the hex, so I CAN select one...

That sounds like one of those (few) cases where your system doesn't like the game for some reason. For most players, the game is not that way at all.

I thought you had reported a fix for these issues here:

https://www.matrixgames.com/forums/tm.asp?m=5132256

Very strange that it doesn't work right, then it does, then it doesn't again.

Is your anti-virus software perhaps messing with the game? I have experienced instances of that. (Not with our game but with other software.)

Again, you had best rely on Matrix/Slitherine Tech Support to fix this permanently for you.



Hi Berto, yes it has improved in every area ( units moving, speed etc.) re; my original report, and this got better too, but this issue though better still , well, lags;)

I use spyhunter which grants full access rights , MS defender which is a cpu hog, is off.




carll11 -> RE: Unit List selected highlights (1/24/2022 7:24:55 PM)


quote:

ORIGINAL: devoncop

Thats interesting Carl.

I dont get those lags at all.

I assume your laptop meets minimum specs for the game ?



yes. by miles....




berto -> RE: Unit List selected highlights (1/24/2022 7:49:43 PM)

quote:

ORIGINAL: carll11

Hi Berto, yes it has improved in every area ( units moving, speed etc.) re; my original report, and this got better too, but this issue though better still , well, lags;)

I use spyhunter which grants full access rights , MS defender which is a cpu hog, is off.

I have an older laptop with

  • Steam
  • McAfee Anti-Virus
  • Dell phone-home system apps

    not to mention (irony)

  • Microsoft phone-home services and system apps

    that, in the right combination -- too often! -- slows that system to a crawl. (My fundamental mistake was to buy a laptop with an old-fashioned physical hard disk, not an SSD. The hard drive is often at 100%, often too the CPU usage %.)

    It could be that, it could be drivers, it could be anything.

    Although your situation is better, I agree it's still not right, not WAD at all. Continue to raise the issue with Matrix/Slitherine Tech Support. We developers are not equipped nor do we have the know-how to assist you with system level issues. Good luck.




  • carll11 -> RE: Unit List selected highlights (1/24/2022 9:04:10 PM)

    quote:

    ORIGINAL: berto

    quote:

    ORIGINAL: carll11

    Hi Berto, yes it has improved in every area ( units moving, speed etc.) re; my original report, and this got better too, but this issue though better still , well, lags;)

    I use spyhunter which grants full access rights , MS defender which is a cpu hog, is off.

    I have an older laptop with

  • Steam
  • McAfee Anti-Virus
  • Dell phone-home system apps

    not to mention (irony)

  • Microsoft phone-home services and system apps

    that, in the right combination -- too often! -- slows that system to a crawl. (My fundamental mistake was to buy a laptop with an old-fashioned physical hard disk, not an SSD. The hard drive is often at 100%, often too the CPU usage %.)

    It could be that, it could be drivers, it could be anything.

    Although your situation is better, I agree it's still not right, not WAD at all. Continue to raise the issue with Matrix/Slitherine Tech Support. We developers are not equipped nor do we have the know-how to assist you with system level issues. Good luck.



  • I will do that Berto...I just sent slitherine helpdesk my issue with a DXdiag report.

    I have a 2 year old Hi Perf dell. No steam, no virus protect except spyhunter which imho, is excellent.

    I do notice my wmi provider host is almost always using 15% of my cpu, but I am not running anything else when I play.

    I make a habit of restarting the game every other turn which helps...





    Page: [1]

    Valid CSS!




    Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
    2.765869