Matrix Games Forums

 Forums  Register  Login  Photo Gallery  Member List  Search  Calendars  FAQ 

My Profile  Inbox  Address Book  My Subscription  My Forums  Log Out

Loading maps

 
View related threads: (in this forum | in all forums)

Logged in as: Guest
Users viewing this topic: none
  Printable Version
All Forums >> [New Releases from Matrix Games] >> Close Combat Series >> Close Combat - Cross of Iron >> Cross of Iron Support >> Loading maps Page: [1]
Login
Message << Older Topic   Newer Topic >>
Loading maps - 12/24/2010 1:06:14 AM   
oweerts

 

Posts: 15
Joined: 7/23/2009
Status: offline 		Hi All,
then
Thanks to help from AW and Teddy, I have been able to play mods for COI. I am having problems loading the maps, however. I have been saving the zipped files into Close Combat\Close Combat III\Maps. I then try to unzip the files into the same destination but I always get an error from telling me there is an error in opening and unable to extract the files. I have tried this for both GW and Vietnam, so I am supposing there is a problem at my end.
Once again, thank you for any help.

Olaf
Post #: 1
RE: Loading maps - 12/27/2010 9:57:50 AM   
Dennistoun


Posts: 233
Joined: 10/17/2007
From: Perth, Scotland.
Status: offline 		Move those new maps out of that main Maps folder into another CCIII folder, open up those new maps, CTRL + A, move all to main Maps folder. That should fix your problem.
In future when saving any other stuff, I always just click "save" (no destination) and the zipped file turns up in my downloads section where I can extract from there to my relevant file.

(in reply to oweerts)
Post #: 2
RE: Loading maps - 12/28/2010 10:12:06 AM   
oweerts

 

Posts: 15
Joined: 7/23/2009
Status: offline 		Hi Teddy,

Thanks for the advice. I made another folder outside of close combat III. I then extracted the files to the Maps folder of COI and got the same error of extraction message. I presume the map pack files are meant to be finally extracted to the Maps folder? (i.e. C:\Program Files\Close Combat\Close Combat III\Maps ?

thanks,

Olaf

(in reply to Dennistoun)
Post #: 3
RE: Loading maps - 12/30/2010 8:17:46 AM   
oweerts

 

Posts: 15
Joined: 7/23/2009
Status: offline 		Hi Teddy,

I followed your advice correctly this time and got success. Thanks for that.

Olaf

(in reply to oweerts)
Post #: 4
RE: Loading maps - 12/31/2010 10:23:53 AM   
Dennistoun


Posts: 233
Joined: 10/17/2007
From: Perth, Scotland.
Status: offline 		Glad you're finally up and running, oweerts!

(in reply to oweerts)
Post #: 5
RE: Loading maps - 1/1/2011 4:46:47 AM   
oweerts

 

Posts: 15
Joined: 7/23/2009
Status: offline 		Hi Teddy,

I should say! I have had CC5 Afrika and WaR ABtF up and going for some time (amazingly, for me, without difficulty). I would like to ask you if you could help me yet again. The problem, this time is that with the GW mod for COI, I keep getting the CD required message. I have downloaded the file from the website that says will fix theproblem, but it doesn't make any difference. Now, from past experience, I'll bet it's something small but I can't see what.... any ideas?

Cheers,
Olaf

(in reply to Dennistoun)
Post #: 6
RE: Loading maps - 1/1/2011 5:15:23 AM   
Andrew Williams


Posts: 6116
Joined: 1/8/2001
From: Australia
Status: offline 		Are you trying to play a scenario that you dont have the map for?


is the error message indicating that you are missing a map?


Have you installed the GW mappack?

A missing map is usually what triggers the CD required error message.


_____________________________


(in reply to oweerts)
Post #: 7
RE: Loading maps - 1/1/2011 6:33:04 AM   
oweerts

 

Posts: 15
Joined: 7/23/2009
Status: offline 		Hi Andrew,

What I have been doing is saving the mapfiles into a subfolder of my downloads folder. Unzipping them into that folder and then copying and pasting the unzipped files into the Maps folder of CC III. This was on advice as I was having trouble unzipping the map files before. Looking at ModSwap, the GW Mappack is not listed as installed - I was not aware that mappacks and files had to be installed, per se, like the mods.
I hope this explains what I am doing and need to be doing.

cheers,
Olaf

(in reply to Andrew Williams)
Post #: 8
RE: Loading maps - 1/2/2011 10:17:37 AM   
oweerts

 

Posts: 15
Joined: 7/23/2009
Status: offline 		Actually Andrew, i must not have the maps properly installed as it asks me for theLVOV4 map. So what might work in installing the maps?

Olaf

(in reply to oweerts)
Post #: 9
RE: Loading maps - 1/2/2011 7:09:45 PM   
Dennistoun


Posts: 233
Joined: 10/17/2007
From: Perth, Scotland.
Status: offline 		Have you checked your map folder to see if you definitely don't have Lvov4 there?

(in reply to oweerts)
Post #: 10
RE: Loading maps - 1/3/2011 10:20:11 AM   
oweerts

 

Posts: 15
Joined: 7/23/2009
Status: offline 		Yes I have and it is there in LOS, MMM, OVM and RFM forms.

Olaf

(in reply to Dennistoun)
Post #: 11
RE: Loading maps - 1/6/2011 10:34:55 PM   
oweerts

 

Posts: 15
Joined: 7/23/2009
Status: offline 		Hi All,

Still can't get that GW mod to work. It would appear that it doesn't recognise the map needed, so i must be installing them incorrectly. Would someone please tell my exactly how they install their mappacks? I followed Teddy's advice and that overcame a hurdle but maybe I did something else incorrectly.

Cheers,
Olaf

(in reply to oweerts)
Post #: 12
RE: Loading maps - 1/7/2011 2:07:48 AM   
DampSquib


Posts: 425
Joined: 3/8/2010
From: UK
Status: offline 		Teddy's advice has been spot on.
So dont know that this will help.

DL both plugins for the Great War..(1 is a operations plugin.)
DL the map pack for GW.
Unzip both Plugins into the Plugins folder.
Have a wee look to make sure they are there....they are woohoo!!
Right click the map pack zip...pick extract all...click next.
Check that the location is correct...it wasn't!!!
Browse to the correct place..click next....done!!
Fire up Mod Swap from Command Centre install Both GW plugins.

Load up COI....ok mods in...woohoo!!
Clicking on most of the battles i get the CD error.
Same for the operations.

Only play the operations starting with GW!!!!
And all the Historical Campaigns work.

< Message edited by DampSquib -- 1/7/2011 2:08:37 AM >

(in reply to oweerts)
Post #: 13
RE: Loading maps - 1/9/2011 8:51:16 AM   
oweerts

 

Posts: 15
Joined: 7/23/2009
Status: offline 		Hi All,

Well, thank goodness, I've go it to work. I thought I was going mad but it would seem that you can only play a the two or so campaigns and make up your own scenarios. Thank you all to Andrew, Teddy and DampSquip.

Cheers
Olaf

(in reply to DampSquib)
Post #: 14
RE: Loading maps - 8/14/2011 4:38:04 AM   
clip001

 

Posts: 7
Joined: 8/12/2011
Status: offline 		Glad you're eventually up and running, oweerts!




var _gaq = _gaq || [];
_gaq.push(['_setAccount', 'UA-13121660-3']);
_gaq.push(['_trackPageview']);

(function() {
var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
})();



_____________________________

My website:free games|play games|flash games

(in reply to oweerts)
Post #: 15
Page:   [1]
All Forums >> [New Releases from Matrix Games] >> Close Combat Series >> Close Combat - Cross of Iron >> Cross of Iron Support >> Loading maps Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts


Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

1.984