RE: WitPTracker AE Release 1.0 (Full Version)

All Forums >> [New Releases from Matrix Games] >> War in the Pacific: Admiral's Edition



Message

Trugrit -> RE: WitPTracker AE Release 1.0 (8/8/2019 5:58:43 PM)

quote:

ORIGINAL: Aksully


quote:

ORIGINAL: Alfred


quote:

ORIGINAL: hooraysimpsons

I put my entire tracker folder in my Dropbox in an attempt to keep the tracker database synced between two PCs to play on. This did not work. Is the tracker.data file not where the information is stored?

TIA


Tracker reads the game saved file.

Alfred

Hello Alfred,
I have a similar question for you;

Say I am working on my next turn set up and just complete orders for all my Australian units and save in Save slot 9 and close WITP AE. Then open up that save the next day to work on units in Sumatra. If I run Tracker will it update with all the Australian moves I made before I start work on Sumatra units. Or does it only run after you complete all orders and complete that turn? Thx in advance!


Tracker will only update after the complete turn resolution.
Then you have to save the turn back into the same slot.



Aksully -> RE: WitPTracker AE Release 1.0 (8/9/2019 2:49:07 AM)


quote:

ORIGINAL: Trugrit

quote:

ORIGINAL: Aksully


quote:

ORIGINAL: Alfred


quote:

ORIGINAL: hooraysimpsons

I put my entire tracker folder in my Dropbox in an attempt to keep the tracker database synced between two PCs to play on. This did not work. Is the tracker.data file not where the information is stored?

TIA


Tracker reads the game saved file.

Alfred

Hello Alfred,
I have a similar question for you;

Say I am working on my next turn set up and just complete orders for all my Australian units and save in Save slot 9 and close WITP AE. Then open up that save the next day to work on units in Sumatra. If I run Tracker will it update with all the Australian moves I made before I start work on Sumatra units. Or does it only run after you complete all orders and complete that turn? Thx in advance!


Tracker will only update after the complete turn resolution.
Then you have to save the turn back into the same slot.


Thx for the clarification John Wayne Fighting Seabees! :) One of my fav WWII movies!



RogerJNeilson -> RE: WitPTracker AE Release 1.0 (8/15/2019 11:49:50 AM)

Ignore I sorted it..........


Ok been using Tracker since it was released for my PBEM games, decided to set up a game against the AI. One silly question, which savefile number do I use?

Roger



RogerJNeilson -> RE: WitPTracker AE Release 1.0 (8/15/2019 6:50:29 PM)

Ok now I have hit a problem. Fresh install of Tracker. I get this.....



[image]local://upfiles/41758/D3F167D1D6944CCCAAAB12017097882B.jpg[/image]



RogerJNeilson -> RE: WitPTracker AE Release 1.0 (8/16/2019 9:29:34 AM)

Ok fresh install, properties set. Will not work with map but now working with Nomap.

Posted for info.

Roger



Korvar -> RE: WitPTracker AE Release 1.0 (8/25/2019 3:02:25 PM)

Roger,

Try editing the "WitPTracker.bat" file in your Tracker install directory (any text editor will do). Keep everything else the same, but edit the "-Xms" and "-Xmx" switches to read: "-Xms512m -Xmx768m". This will give Tracker a little more memory to play with and may solve your map issue as well. FYI, those memory settings are the limit of what Tracker can use - it does not seem to like additional memory allocations beyond 512/768.

That said, I've had good luck with using Tracker on those memory settings.



Schorsch -> RE: WitPTracker AE Release 1.0 (8/26/2019 5:59:03 AM)

im useing the same settings, but at some point i always have to switch to the nomap version. there is just too much data afte x amount of turns to be handled. you can delete the datafiles to make the mapversion work later but uŽll have to deal with the loss off data history (for example u delete the files at dec 31st every year, and have jan 1st as "turn 1" shown)



Korvar -> RE: WitPTracker AE Release 1.0 (8/26/2019 2:16:06 PM)

There is a hard limit to the database size (2GB IIRC), which usually manifests sometime in '43. I usually just archive the database and start a new one tracking new moves. The good news is not all historical data will be lost - some of it will be picked up again when a new turn is loaded. All of the individual turn details WILL be lost - but cumulative data such as ships sunk will reappear.



Hanzberger -> RE: WitPTracker AE Release 1.0 (9/21/2019 11:47:33 AM)

Under the Supply&Fuel tab I have only 2 regions. How do I get multiple regions as I do under the oil&resource tab.

[image]local://upfiles/20521/A446933C27EA4E4D9966583D72F64CD9.jpg[/image]



Hanzberger -> RE: WitPTracker AE Release 1.0 (9/21/2019 11:49:34 AM)

Oil/resource tab. I even tried DL an old tracker to get the Fullregions_txt but that did not work either.

[image]local://upfiles/20521/D9F88BF0697B4082865B40263A2B144D.jpg[/image]



floydg -> RE: WitPTracker AE Release 1.0 (9/25/2019 1:55:04 AM)

Import the regions. Some screens don't update immediately, so you need to restart the program for the import to fully "take".



AlessandroW -> RE: WitPTracker AE Release 1.0 (9/26/2019 3:27:02 PM)

Hi,

quick question:

can I combine more regions together? Something like China and Burma in a big region.



floydg -> RE: WitPTracker AE Release 1.0 (9/27/2019 12:39:39 AM)


quote:

ORIGINAL: AlessandroW

Hi,

quick question:

can I combine more regions together? Something like China and Burma in a big region.


Yes.

You can do it manually in the Bases screen by clicking on the region cell and setting a different value.
Or edit the region file itself to be what you want and then import it.



AlessandroW -> RE: WitPTracker AE Release 1.0 (10/3/2019 6:50:57 PM)

Sorry for the late response!

My question was not so clear, I mean keeping two values togheter, i.e. Hokkaido and Honshu that can be tracked separated but then merged in a big region without to change the values manually.
Anyhow after few days using the Tracker I think it is not possible.



Nomad -> RE: WitPTracker AE Release 1.0 (10/3/2019 6:55:32 PM)


quote:

ORIGINAL: AlessandroW

Sorry for the late response!

My question was not so clear, I mean keeping two values togheter, i.e. Hokkaido and Honshu that can be tracked separated but then merged in a big region without to change the values manually.
Anyhow after few days using the Tracker I think it is not possible.


No, during their development it was something that Damien, Floyd and I discussed, but it did not happen.



floydg -> RE: WitPTracker AE Release 1.0 (10/3/2019 9:36:41 PM)

Yeah, we didn't implement any "nesting" of regions.



AlessandroW -> RE: WitPTracker AE Release 1.0 (10/4/2019 7:35:21 PM)

Thanks for the feedback Nomad and floydg [:)]



castor troy -> RE: WitPTracker AE Release 1.0 (10/14/2019 5:41:11 PM)

Get an error during loading. Tracker was working just fine for some 90 turns and suddenly it stopped working. [&:] Reinstalled Java but didn't help.

[image]local://upfiles/13774/BA849326DB4948D794C3E7FC2AE4DAA6.jpg[/image]



larryfulkerson -> RE: WitPTracker AE Release 1.0 (10/14/2019 6:22:59 PM)

You've run out of memory. maybe try boosting how much space you allocate in your execution line. Or maybe try shutting off some of the background programs running before you try to start Tracker? I'm not really sure how to fix this but it seems like one of these remedies might help.



floydg -> RE: WitPTracker AE Release 1.0 (10/14/2019 11:41:46 PM)

Check out the last section of https://sites.google.com/site/witptracker/support



castor troy -> RE: WitPTracker AE Release 1.0 (10/15/2019 7:15:21 PM)

thanks, using no map did the trick and thanks for putting all that work into tracker, what an amazing tool! [&o]



Yaab -> RE: WitPTracker AE Release 1.0 (10/28/2019 8:14:08 AM)

Java, cursed by thy name!

Long story short.

Downloaded Java 64-bit in April 2019.

Started scen001 as Allies. Tried to load the first turn in Tracker. Got the " pwsdll7.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform " error

Changed my TrackerNoMap batch file from the deafult:

java -Xms384m -Xmx512m -jar "WitPTracker.jar" nomap
pause

to a new path, where my 64-bit Java exe is placed

"C:\Program Files\Java\jre1.8.0_231\bin\java.exe" -Xms256m -Xmx768m -jar "WitPTracker.jar" nomap
pause

Yet, the IA 32-bit error is still there! I didn't sign up for THIS Java campaign!




BillBrown -> RE: WitPTracker AE Release 1.0 (10/28/2019 9:19:34 AM)

Yaab, you need to download the 32-bit version of Java.



Yaab -> RE: WitPTracker AE Release 1.0 (10/28/2019 9:37:22 AM)

You, sir, are a genius!

Downloaded 32-bit Java.

Changed the Tracker bat path to

"C:\Program Files (x86)\Java\jre1.8.0_231\bin\java.exe" -Xms256m -Xmx768m -jar "WitPTracker.jar" nomap
pause

And it works![&o]



Lysus -> RE: WitPTracker AE Release 1.0 (12/2/2019 6:46:26 PM)

D/L link broken [&:]



BillBrown -> RE: WitPTracker AE Release 1.0 (12/2/2019 6:58:00 PM)

quote:

ORIGINAL: Lysus

D/L link broken [&:]


No, you have to click on the arrow all the way to the right, not the file name.

[image]local://upfiles/6818/96BDD320D2814A1CAF1D20A35AD6A7D5.jpg[/image]



JamesHunt -> RE: WitPTracker AE Release 1.0.1 Available (12/11/2019 10:08:27 PM)

I am testing the Japanese Human vs Ally AI Ironman "Revenge of the Dornier" scenario from the 2012 update thread and I get following errors when loading turn 1

Error comparebases
Error compare aploss
error compare aircraft

The loading bar in the lower part of the tool freezes at "compare ships"

Is this tool not compatible with the Japanese vs Ally AI Ironman scenario?

I also had to do the -Xms512m -Xmx768m modification otherwise the tool would crash most times when loading the map version, now it works.



PaxMondo -> RE: WitPTracker AE Release 1.0.1 Available (12/11/2019 11:57:21 PM)

No, I use tracker all the time. It looks as though your .properties isn't configured correctly for either the side you are playing or the # day/turn. something like that.



JamesHunt -> RE: WitPTracker AE Release 1.0.1 Available (12/12/2019 1:38:41 PM)

Prefernces settings:

# WitPTracker AE properties file
# Directory of the game
Dir=[E:\Games\War in the Pacific Admiral's Edition]
# Type of game. 0=AI, 1=PBEM
GameType=[0]
# Side you are playing. 0=Japan, 1=Allies
Side=[0]
# Password. Only needed for PBEM
Password=[abc123]
# Name of the base save file
SaveFile=[wpae005.pws]
# Mode the program will look for save files.
# 0 = just in the local folder
# 1 = just in the game folder: [Dir]/SAVE
# 2 = local and then if not found there, the game folder
SaveMode=[1]
# Text to put in the header of the main window
Header=[Japan Ironman]
# Turn cycle (days per turn). 1 or 2 are supported
TurnCycle=[1]



Enforcer -> RE: WitPTracker AE Release 1.0 (12/12/2019 11:18:39 PM)


Exception in thread "AWT-EventQueue-0" java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
at java.util.Vector.elementAt(Unknown Source)
at witptracker.AirGroupsPanel$3.getValueAt(AirGroupsPanel.java:288)
at witptracker.AirGroupsPanel$3.getColumnClass(AirGroupsPanel.java:299)
at javax.swing.table.TableRowSorter.useToString(Unknown Source)
at javax.swing.DefaultRowSorter.updateUseToString(Unknown Source)
at javax.swing.DefaultRowSorter.sort(Unknown Source)
at javax.swing.DefaultRowSorter.setRowFilter(Unknown Source)
at witptracker.AirGroupsPanel.actionPerformed(AirGroupsPanel.java:1384)
at javax.swing.JComboBox.fireActionEvent(Unknown Source)
at javax.swing.JComboBox.contentsChanged(Unknown Source)
at javax.swing.AbstractListModel.fireContentsChanged(Unknown Source)
at javax.swing.DefaultComboBoxModel.setSelectedItem(Unknown Source)
at javax.swing.DefaultComboBoxModel.addElement(Unknown Source)
at javax.swing.JComboBox.addItem(Unknown Source)
at witptracker.AirGroupsPanel.PopulateCombos(AirGroupsPanel.java:1841)
at witptracker.AirGroupsPanel.<init>(AirGroupsPanel.java:1226)
at witptracker.GUIMain.CreateAndShowGUI(GUIMain.java:814)
at witptracker.GUIMain$5.run(GUIMain.java:1042)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$500(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)



Page: <<   < prev  191 192 [193] 194 195   next >   >>

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
1.890625