RE: WitPTracker AE Release 1.0 (Full Version)

All Forums >> [New Releases from Matrix Games] >> War in the Pacific: Admiral's Edition



Message

Nomad -> RE: WitPTracker AE Release 1.0 (5/30/2020 4:03:33 AM)

I have not heard anything yet.



floydg -> RE: WitPTracker AE Release 1.0 (5/31/2020 5:34:41 PM)


quote:

ORIGINAL: Nomad

I have not heard anything yet.


I'll look at it. It will take some time.



PaxMondo -> RE: WitPTracker AE Release 1.0 (6/3/2020 3:13:35 AM)

I've found and fixed several inconsistencies with air groups, but nothing yet. still not working.



floydg -> RE: WitPTracker AE Release 1.0 (6/3/2020 4:54:18 PM)


quote:

ORIGINAL: PaxMondo

I've found and fixed several inconsistencies with air groups, but nothing yet. still not working.


I found that some pilots in reserve were assigned to unknown plane types (15 and 17).
I also saw that Ponape was not assigned to any nation and that would cause the map to fail.



Nomad -> RE: WitPTracker AE Release 1.0 (6/4/2020 3:31:20 AM)

Floyd, looking at the editor I found that these aircraft types are defined in the editor.

Looking at a number of scenarios, it seems that no one else has used those above 12.
[image]local://upfiles/4176/4A6098CC27DF476DB6346398C6BDD9BB.jpg[/image]



PaxMondo -> RE: WitPTracker AE Release 1.0 (6/4/2020 11:35:52 PM)

OK, when I fixed the pilots AND location ID 6775 (change from HQ to City), tracker will now load.

Thanks Floyd!!!!



AtParmentier -> RE: WitPTracker AE Release 1.0 (6/13/2020 5:21:01 PM)

Question, when loading a turn i get the error : Error comparing APLoss (COMPAREAPL_UNEQUALSIZE)
how do I fix it?

After finding one post in here and following those instructions, it could be fixed. But have to wait until the next turn to see.



Nomad -> RE: WitPTracker AE Release 1.0 (7/2/2020 2:44:18 AM)

Here is another blooper for you. As you can see, the resource history is not showing the
right numbers, it is completely ignoring Ndeni in the calculation. Ndeni was occupied by
Japan and then liberated, do you think that might be a problem?





[image]local://upfiles/4176/B2CFAE878811487BA73F3FFD839006FA.jpg[/image]



floydg -> RE: WitPTracker AE Release 1.0 (7/3/2020 2:22:55 PM)

Can you try one experiment?
Exit out of WitPTracker and restart. Does that fix it?



Nomad -> RE: WitPTracker AE Release 1.0 (7/3/2020 3:07:45 PM)

That was the first thing I tried. I tried both with and without the map, same result.

And it has been a few more turn and still the same.



PaxMondo -> RE: WitPTracker AE Release 1.0 (7/3/2020 3:11:30 PM)

I suspect Ndeni is still defined to be IJ … go to the base list and you can see who tracker is saying owns it. you may need to advance a turn.



PaxMondo -> RE: WitPTracker AE Release 1.0 (7/3/2020 3:12:42 PM)

the other thing is that you grabbed the wrong save file … I've done that too many times … double check the file loaded (date/time stamp) to be sure it is correct ….



Nomad -> RE: WitPTracker AE Release 1.0 (7/3/2020 3:21:45 PM)


quote:

ORIGINAL: PaxMondo

I suspect Ndeni is still defined to be IJ … go to the base list and you can see who tracker is saying owns it. you may need to advance a turn.


If tracker thought Ndeni was IJ, it would not show fuel and supply there.




Nomad -> RE: WitPTracker AE Release 1.0 (7/3/2020 3:22:13 PM)


quote:

ORIGINAL: PaxMondo

the other thing is that you grabbed the wrong save file … I've done that too many times … double check the file loaded (date/time stamp) to be sure it is correct ….


I don't understand what you mean by the wrong save file. You can only load the proper save file.



Nomad -> RE: WitPTracker AE Release 1.0 (7/3/2020 3:28:03 PM)

Floyd, I did just try an experiment. I crated a new tracker with only the data from the current turn and it displays Santa Cruz Islands properly.

It would seem that there is a problem with retaking a base. I will see what happens in the future.



floydg -> RE: WitPTracker AE Release 1.0 (7/3/2020 4:31:42 PM)

Maybe if the base changes hands multiple times it gets confused (it may be summing the resources in starting from when you held it before).



surfcandy -> RE: WitPTracker AE Release 1.0 (7/19/2020 7:30:51 AM)

Should this work with most recent Java for 64-bit systems? I don't have the 32-bit version on my computer. I installed program properly but when I run the batch file the program doesn't load up and program just stays in the Dos command looking window.



Voltreffer -> RE: WitPTracker AE Release 1.0 (7/19/2020 1:37:19 PM)

I believe Tracker uses 32-bit Java; at least that's what I use. That said, you can have both 32 and 64 bit Java installed simultaneously on your computer.

Just click the 'Windows Offline' link on the Java site HERE.

Then make sure you point Tracker to the 32-bit version of Java by modifying the file path to 'java.exe' in the Tracker file 'WitPTracker.bat' (in the Tracker folder). Open the file with a text editor like Notepad.



surfcandy -> RE: WitPTracker AE Release 1.0 (7/19/2020 5:06:03 PM)

quote:

ORIGINAL: Voltreffer

I believe Tracker uses 32-bit Java; at least that's what I use. That said, you can have both 32 and 64 bit Java installed simultaneously on your computer.

Just click the 'Windows Offline' link on the Java site HERE.

Then make sure you point Tracker to the 32-bit version of Java by modifying the file path to 'java.exe' in the Tracker file 'WitPTracker.bat' (in the Tracker folder). Open the file with a text editor like Notepad.

How should I open WitPTracker.bat with Notebook to set the file path?



Yaab -> RE: WitPTracker AE Release 1.0 (7/19/2020 5:20:29 PM)

You must edit WitpTracker.PROPERTIES file.



surfcandy -> RE: WitPTracker AE Release 1.0 (7/19/2020 6:35:02 PM)


WitpTracker.PROPERTIES file

I followed the directions and made sure my info in WitpTracker.PROPERTIES file was exactly the same as the authors.




Yaab -> RE: WitPTracker AE Release 1.0 (7/19/2020 7:26:49 PM)

My bad.

Check if you have "Edit" option when you right-click WitpTRackerNoMap.Bat.

I used the "Edit" option for this file to change the path from 64-bit Java to 32-bit Java in Tracker.



surfcandy -> RE: WitPTracker AE Release 1.0 (7/20/2020 1:18:16 AM)

Ok I sort of got it working.The program loads up but I am having problems getting the saved games to load up after a turn. I get messages like turn 2 is already loaded when I am on turn 3 or 4. Also when I direct the "multi-turn" to the game saved folder I don't see any saved games and message says not found. Will search the comments some more.



Yaab -> RE: WitPTracker AE Release 1.0 (7/20/2020 5:40:34 AM)

Select one save slot in the WiTP:AE save slot list. This will be your Tracker save slot for the rest of your campaign. I mostly choose slot 004 for this.

Amend the WitPTracker.PROPERTIES file in Notepad, where you have specify the save slot number in two lines.

My PROPERTIES lines look like this:

# Name of the base save file
SaveFile=[wpae004.pws]

# Text to put in the header of the main window
Header=[wpae004]


Run your turn in WiTP:AE.

Once your turn 1 is resolved, save it in slot 004.

Go to your SAVE folder in WiTP:AE and copy the saved 004.pws file. Drop this file in the main Tracker folder.

Open Tracker.

Click "Read turn" option to read the data from turn 1.

Play the game again, and save your resolved turn 2 in save slot 004.

Repeat ad infinitum.






surfcandy -> RE: WitPTracker AE Release 1.0 (7/20/2020 4:34:42 PM)

I noticed that WitPTracker AE can not read saved game files in WiTP:AE SAVE game directory (wpae004 etc.) or can it?



Yaab -> RE: WitPTracker AE Release 1.0 (7/20/2020 4:42:42 PM)

No, it can't.

You have to manually copy your wpae004.pws file and paste it into your main Tracker folder. Only then will Tracker read the data from wpae004.pws file.



Nomad -> RE: WitPTracker AE Release 1.0 (7/20/2020 4:55:36 PM)

I can not believe how much bad information is given out:

From the witptracker/properties file

# Directory of the game
Dir=[d:\War in the Pacfic Admirals Edition\PBEM scen 1 gene]
# Type of game. 0=AI, 1=PBEM
GameType=[1]
# Side you are playing. 0=Japan, 1=Allies
Side=[1]
# Password. Only needed for PBEM
Password=[xxxxxxxx]
# Name of the base save file
SaveFile=[wpae005.pws]
# Mode the program will look for save files.
# 0 = just in the local folder
# 1 = just in the game folder: [Dir]/SAVE
# 2 = local and then if not found there, the game folder
SaveMode=[1]
# Text to put in the header of the main window
Header=[PBEM scen 1 Gene]
# Turn cycle (days per turn). 1 or 2 are supported
TurnCycle=[1]


If you use savemode=[1] then it will read the file from the save folder.



Yaab -> RE: WitPTracker AE Release 1.0 (7/20/2020 5:05:47 PM)

So I had learnt a wrong method from the very beginning! Good thing you intervened and saved the day.



surfcandy -> RE: WitPTracker AE Release 1.0 (7/20/2020 6:32:43 PM)

WHat I noticed is Yes it will read from game directory folder choice 1 in witptracker/properties file. My question is you don't actually see the saved game when you go to the save folder using WitPTracker AE.No save game file is actually visible. Only when I change the wpae00?.pws in Properties does WitPTracker AE read and "runs" the saved game in game directory that is not even visible.

I was hoping the saved games were visible in game directory saves so I wouldn't have to change the wpae00?.pws all the time.



Rekm41 -> RE: WitPTracker AE Release 1.0 (7/24/2020 8:55:58 PM)

I have tried many different ways of getting this to go and am getting frustrated. I have Java 32 bit installed ETC. Maybe i have the wrong path or something. Error message I am getting


[image]local://upfiles/13510/F95A5423B15B4221B6B3EC8932A62363.jpg[/image]



Page: <<   < prev  194 195 [196] 197 198   next >   >>

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
2.34375