RE: Search Arcs problem seems to still be flawd (bugg) ... (Full Version)

All Forums >> [New Releases from Matrix Games] >> War in the Pacific: Admiral's Edition



Message

davidjruss -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/2/2010 8:56:12 AM)

With , it seems , the manual search arc being "bugged" at present , would a "computerised" search ( such as ASW ) from an aircraft based on a coast hex , search the inland hexes as well as the sea ones ?

To prevent my relatively few search aircraft looking in the most inappropriate areas I tend to manually select which degrees of compass bearing to use.

I therefore hope that the search problem can be resolved.



crsutton -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/2/2010 2:58:58 PM)

quote:

ORIGINAL: bradfordkay

I can understand your point. It's just that search arcs was one of the extra details added to AE that I really enjoy. It's much more fun to setup search arcs (and verify that you have the right coverage by hitting the "z" key) than it is to train pilots. Both of these are an aspect of a level of detail that the theatre commander would not be bothering with, and so are extra work that really didn't need to be in there. However, the consequences of having search arcs in the game and not using them are far less devastating than having pilot training in the game and not using it.

To each his own... my hopes are that they will be fixed.




Ok, I will concede that if they do institute working search arcs that I most likely will "not" delete the game from my hard drive....[;)]



TommyG -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/2/2010 8:27:47 PM)

I have recently discovered that many things I learned in WitP or early AE, no longer apply. I want to make sure I have the current staus of search arcs correct. I am now setting all seach at "random arc" and when I press the Z key I get a search arc of 0-30 degrees. Am I doing this right? I do not want to search 0-30, which is usually over the desert.
As an an aside, I am aganist micromanaging anything I don't want to micromanage. Getting to see the pretty green search patterns is, to me, worth the time to set it up. Pulling out pilots one at a time with multiple clicks to refill a soon-to-be disbanded squadron is not. I spend more time on pilot training than all other elements of a turn combined.
Since this is obviously a matter of personal taste, I'll live with all the details.



Canoerebel -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/2/2010 8:29:41 PM)

quote:

ORIGINAL: TommyG
As an an aside, I am aganist micromanaging anything I don't want to micromanage. Getting to see the pretty green search patterns is, to me, worth the time to set it up. Pulling out pilots one at a time with multiple clicks to refill a soon-to-be disbanded squadron is not. I spend more time on pilot training than all other elements of a turn combined.Since this is obviously a matter of personal taste, I'll live with all the details.


+1 (and I would like to raise that by 10 to the 29th power)



USSAmerica -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/2/2010 9:11:24 PM)


quote:

ORIGINAL: TommyG

I have recently discovered that many things I learned in WitP or early AE, no longer apply. I want to make sure I have the current staus of search arcs correct. I am now setting all seach at "random arc" and when I press the Z key I get a search arc of 0-30 degrees. Am I doing this right? I do not want to search 0-30, which is usually over the desert.
As an an aside, I am aganist micromanaging anything I don't want to micromanage. Getting to see the pretty green search patterns is, to me, worth the time to set it up. Pulling out pilots one at a time with multiple clicks to refill a soon-to-be disbanded squadron is not. I spend more time on pilot training than all other elements of a turn combined.
Since this is obviously a matter of personal taste, I'll live with all the details.


Tommy, until they are fixed in the next "major" code patch, I would recommend not using the search arcs at all. The best way is to not select anything for them, not even the "random arc". You should not see any pretty search patterns on the map when you press the Z key. [:)]



bradfordkay -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/2/2010 9:15:43 PM)

Mike, how can you reset to "no search arcs" without hitting the "random arc" key?

If you stand the unit down and then reset it to any percentage of naval search it will bring back up the same search arc you had previously set.



witpqs -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/2/2010 9:34:12 PM)

Set the arc as "000 to 000".

EDIT: Which it should automatically do when you press the "Reset Arc" button.



USSAmerica -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/2/2010 9:36:15 PM)

OK, sorry, I guess I misunderstood the "random" setting.  If the start and end are both set to 000, then effectively the search arcs are turned off.  [:)]



bradfordkay -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/2/2010 9:53:31 PM)


quote:

ORIGINAL: witpqs

Set the arc as "000 to 000".

EDIT: Which it should automatically do when you press the "Reset Arc" button.



I was always concerned that setting the arc as 000 to 000 would set up a 360 degree search arc, as opposed to a random search arc.



witpqs -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/2/2010 9:59:40 PM)

quote:

ORIGINAL: bradfordkay


quote:

ORIGINAL: witpqs

Set the arc as "000 to 000".

EDIT: Which it should automatically do when you press the "Reset Arc" button.



I was always concerned that setting the arc as 000 to 000 would set up a 360 degree search arc, as opposed to a random search arc.


Michael clarified that a while back - it isn't actually a random arc. It uses the old code where there is a chance to detect any TF within range.



TommyG -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/2/2010 10:12:27 PM)

I'm glad I asked. So, are we agreed then, that you hit "reset" then leave it the hell alone?



witpqs -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/2/2010 10:54:34 PM)

quote:

ORIGINAL: TommyG

I'm glad I asked. So, are we agreed then, that you hit "reset" then leave it the hell alone?


Yes - but - I have seen what was mentioned above. Sometimes when you stand down a unit, then later on bring it back on line for search it will 'remember' some old arc it was using. So you might have to reset again! Just be alert.



TommyG -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/2/2010 11:50:44 PM)

Roger that



bradfordkay -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/3/2010 12:00:49 AM)


quote:

ORIGINAL: witpqs

quote:

ORIGINAL: TommyG

I'm glad I asked. So, are we agreed then, that you hit "reset" then leave it the hell alone?


Yes - but - I have seen what was mentioned above. Sometimes when you stand down a unit, then later on bring it back on line for search it will 'remember' some old arc it was using. So you might have to reset again! Just be alert.



Nawww... it will remember the last search arc setting. I'm pretty experienced at this as I really liked messing with my search arcs!



TommyG -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/3/2010 1:09:47 AM)

Back to being confused. Mr Bradfordkay, do you or do you not confirm that hitting "reset arc" is the current best approach to an effective search regarless of direction?



bradfordkay -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/3/2010 1:10:34 AM)

Yes. Click the "reset arc" button and your squadron will be set to random arcs.


Should you ever stand that squadron down and then bring it back online it will remember the random arc setting.


If you had it set on, say, searching from 030 to 150 degrees and stood it down the next time you ordered it to search it would remember the 030 to 150 degree setting. It always remembers the last setting when being re-issued orders to search after being stood down.

Does it all make sense now?



TommyG -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/3/2010 1:34:52 AM)

I have my marching orders. I am grateful for all input.



Alpha77 -> RE: Search Arcs problem seems to still be flawd (bugg) ... (12/5/2010 5:33:45 PM)

Just set the arc to 0 to 0. I did this right after had I read from the bug. I was very glad about that bug to be honest. The searches now work much better with 0 to 0 search (and lesss micro). In fact I have now more search assets then the Jap and in late 42 and all the troubles of earlier times seem to be gone (means Jap sneaking behind my lines and big TFs not detected etc.). Even ASW searches are good now (just use enough planes best with low altitude for subs). However it seems planes donīt KILL subs so you still need to send out out surface ASW forces. Recently a search found a sub, but the turn after the target was lost (symbol disapaered). I still had sent out 2 DDs, and guess what they found the sub 2 turns later and DCed it

But this is an older game version.... [:)]



Page: <<   < prev  1 [2]

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
0.7338867