RE: New 2D Counter Mod (WIP) (Full Version)

All Forums >> [New Releases from Matrix Games] >> Strategic Command Series >> Strategic Command WWII: World at War >> MODS and Scenarios



Message

AZKGungHo -> RE: New 2D Counter Mod (WIP) (7/31/2019 9:09:27 PM)

Thanks - I didn't even see that little box. It works fine now.



epower -> RE: New 2D Counter Mod (WIP) (8/1/2019 12:21:01 AM)

Glad to hear everything worked out
That check box can be tough to spot first time through, especially at higher resolutions.



RocketMan -> RE: Iron Cross 2D Counter & Map Mod Released (8/2/2019 10:46:16 PM)

quote:

ORIGINAL: Phoenix100

In the first post in here this map looks fantastic, everything clear and easy to see. But when I install it it looks like the pic below. Terrain kind of blurry, no? Anyone know what I'm doing wrong? Thanks.



I have the same problem. The map looks washed out. Any ideas on how to fix this?

Edit: The strategic maps being blank is not an issue with the mod.

[image]local://upfiles/13083/2BE1C82FA18246E7AEAD5FE954BB87DF.jpg[/image]



Randalf Ravennaux -> RE: New 2D Counter Mod (WIP) (9/1/2019 3:24:11 PM)

Great mod..I have been playing hotseat with a friend that has vision problems and the bleached map makes it much more playable for him. Thank you.



Simulacra53 -> RE: New 2D Counter Mod (WIP) (11/28/2019 3:20:32 PM)

just a quick Q - when using the IronX mod in combination with the Navy fleet mod, your counters have a different color compared to your vanilla IronX Mod counters. Is that correct?



Hairog -> RE: New 2D Counter Mod (WIP) (11/28/2019 11:28:14 PM)

Naval Fleet mod is a mod of IronX's fine work by me. Yes some of the colors are different. I can only think of one and that is the Soviets. I like red Soviets.



Simulacra53 -> RE: New 2D Counter Mod (WIP) (11/29/2019 1:41:20 PM)

Thanks for the confirmation.
I like your naval mod, I prefer IronX’s colors.
Luxury problem.

However as I prefer to keep the SC3 games aligned - I’ll stick with IronX + flags

...but your fleet setup should have been the default [:D]



baldbrother -> RE: Iron Cross 2D Counter & Map Mod Released (2/13/2020 2:22:32 AM)

This is supposed to be available in the Steam version but is grayed out in the mod selection.I'm running V1.05.01. Thanks.



Hairog -> RE: New 2D Counter Mod (WIP) (2/13/2020 3:43:17 AM)

The hex fleet idea was borrowed from Sipres great work. Which is offered instead of the stock 3D in the mod.

[image]local://upfiles/751/6004A69D41994A6E9B7D3B8632C60E04.jpg[/image]



Tanaka -> RE: New 2D Counter Mod (WIP) (2/17/2020 6:34:09 PM)

New Patch. Getting a FAILED (draw sprite to buffer) segmentation violation error message and crash when clicking on any HQ and selecting auto assist.

I tested it and seems to only happen with Iron Cross Map Mod turned on.



Tanaka -> RE: New 2D Counter Mod (WIP) (2/17/2020 6:59:54 PM)


quote:

ORIGINAL: Tanaka

New Patch. Getting a FAILED (draw sprite to buffer) segmentation violation error message and crash when clicking on any HQ and selecting auto assist.

I tested it and seems to only happen with Iron Cross Map Mod turned on.


Just needed to update mod and it works fine now.



boudi -> RE: New 2D Counter Mod (WIP) (2/23/2020 8:33:21 PM)

Link on Mega seems broken ?



Richard III -> RE: New 2D Counter Mod (WIP) (5/14/2020 12:10:48 AM)

Not needed question



Richard III -> RE: Iron Cross 2D Counter & Map Mod Released (5/20/2020 4:33:22 PM)

The center of the China NATO symbols are just an X in a the unit type box ( hard to explain) It took a longggg time to configure the Game to my specs and it is a great Mod. Any idea of a safe fix ?

Also it shows Iron_ Cross_ Mod Ver 4.4 in the mods view at start up but I thought I had installed Ver 4.6 ?

Again these Mods turn the Strat Comn games into a whole new experience, so good I bought Strat Comn WW I....[;)]



jarcher1701 -> RE: New 2D Counter Mod (WIP) (6/28/2020 11:30:12 AM)

Hello. My Strategic Command WW2 Europe game is running the latest version. I've just installed the mod and I'm getting a 'FAILED(draw_sprite_to_buffer): Segmentation Violation' error when trying to load any scenario. I'm running on a modern laptop with a Ryzen 3500u CPU, 8 GB RAM and Radeon Vega Graphics (2GB ram shared with main memory).

Can anyone assist? The standard game runs fine AFAIK, but only just bought. Thanks in advance.



ARPH56 -> RE: Iron Cross 2D Counter & Map Mod Released (7/6/2020 11:35:04 PM)

Hello all - downloaded the IC Mod v4.6 but cannot find installation instructions in the folder. Are they posted somewhere or did I miss something in the download. Thanks



Tanaka -> RE: Iron Cross 2D Counter & Map Mod Released (7/12/2020 6:21:51 PM)

Using the editor with this mod enabled I get a failed draw sprite on map surface segmentation violation error when 3d sprites are turned on? Using Mod 4.6 version.



Hubert Cater -> RE: Iron Cross 2D Counter & Map Mod Released (7/13/2020 2:58:03 PM)


quote:

ORIGINAL: Richard III

The center of the China NATO symbols are just an X in a the unit type box ( hard to explain) It took a longggg time to configure the Game to my specs and it is a great Mod. Any idea of a safe fix ?

Also it shows Iron_ Cross_ Mod Ver 4.4 in the mods view at start up but I thought I had installed Ver 4.6 ?

Again these Mods turn the Strat Comn games into a whole new experience, so good I bought Strat Comn WW I....[;)]


Try deleting the v4.4 version mod folder and reinstalling v4.6 and then only 4.6 will be listed in the MODS screen, hopefully this helps.



Hubert Cater -> RE: New 2D Counter Mod (WIP) (7/13/2020 3:00:35 PM)

quote:

ORIGINAL: jarcher1701

Hello. My Strategic Command WW2 Europe game is running the latest version. I've just installed the mod and I'm getting a 'FAILED(draw_sprite_to_buffer): Segmentation Violation' error when trying to load any scenario. I'm running on a modern laptop with a Ryzen 3500u CPU, 8 GB RAM and Radeon Vega Graphics (2GB ram shared with main memory).

Can anyone assist? The standard game runs fine AFAIK, but only just bought. Thanks in advance.


It looks like there is a bug in the code that this mod (Iron Cross Mod) has now exposed.

To work around it for now and until the next game update:

1) try playing with the mod only in NATO counter mode, e.g. 3D units turned off

OR

2) if playing in 3D mode, try setting the LAND COUNTER STYLE to NONE (in the OPTIONS screen), e.g. no discs under the 3D units and that should work to get you past this error




Hubert Cater -> RE: Iron Cross 2D Counter & Map Mod Released (7/13/2020 3:06:28 PM)


quote:

ORIGINAL: ARPH56

Hello all - downloaded the IC Mod v4.6 but cannot find installation instructions in the folder. Are they posted somewhere or did I miss something in the download. Thanks


You'll just need to extract it and install it to the following MODS folder on your end, e.g. copy and paste here:

C:\Users\<username>\Documents\My Games\Strategic Command WWII - World at War\Mods

When installed the folder paths should look like this:

C:\Users\<username>\Documents\My Games\Strategic Command WWII - World at War\Mods\Iron_Cross_Mod_v4-6

After that you'll just need to go to SETTINGS->MODS and turn on the mod (if needed) by ticking off the box next to the listed mod.

Hope this helps,
Hubert



Hubert Cater -> RE: Iron Cross 2D Counter & Map Mod Released (7/13/2020 3:08:20 PM)


quote:

ORIGINAL: Tanaka

Using the editor with this mod enabled I get a failed draw sprite on map surface segmentation violation error when 3d sprites are turned on? Using Mod 4.6 version.


Hi Tanaka,

Looks like for now you'll need to edit in NATO counter mode for the mod to work in the Editor until the bug I recently found is corrected.

To do this, try playing the game in NATO counter mode and then this will reset the global setting for the Editor as well.

Hope this helps,
Hubert



Hubert Cater -> RE: Iron Cross 2D Counter & Map Mod Released (7/13/2020 4:27:06 PM)

Actually on further inspection it looks like an issue with the mod. If you delete the following file in the mod it should resolve the issue for now as well.

C:\Users\<username>\Documents\My Games\Strategic Command WWII - World at War\Mods\Iron_Cross_Mod_v4-6\Bitmaps\unit_counter_flag_sprites.png



Tanaka -> RE: Iron Cross 2D Counter & Map Mod Released (7/13/2020 4:36:44 PM)

quote:

ORIGINAL: Hubert Cater

Actually on further inspection it looks like an issue with the mod. If you delete the following file in the mod it should resolve the issue for now as well.

C:\Users\<username>\Documents\My Games\Strategic Command WWII - World at War\Mods\Iron_Cross_Mod_v4-6\Bitmaps\unit_counter_flag_sprites.png


Yep that fixed the issue thanks!



FalconSMG1 -> RE: Iron Cross 2D Counter & Map Mod Released (7/26/2020 7:26:29 AM)

I think the washed out look and very pale blue seas is intentional??

Personally I prefer a bit more contrast. But not wanting to criticising a great mod and great effort.

I may try and see if I can keep the original map and still have the icon mod.




Stego -> RE: Iron Cross 2D Counter & Map Mod Released (8/13/2020 9:29:50 AM)

Hi

After installing the mod everything is OK but the soviet NATO counters. They appear like without the mod.

Strange issue



[image]local://upfiles/71214/514172B247CF420488615FBCAA9C36D3.jpg[/image]



Platoonist -> RE: Iron Cross 2D Counter & Map Mod Released (8/13/2020 9:41:44 AM)


quote:

ORIGINAL: Stego

Hi

After installing the mod everything is OK but the soviet NATO counters. They appear like without the mod.

Strange issue



Yeah, I have this same issue too. The only way I've found to resolve it is to go into settings, click the mod box off and then on again. When the game restarts the proper Soviet unit icons are finally there,



Stego -> RE: Iron Cross 2D Counter & Map Mod Released (8/13/2020 11:21:41 PM)


Solved

Thank you!



georgiabulldog1 -> RE: Iron Cross 2D Counter & Map Mod Released (8/23/2020 3:38:16 PM)

deleted



bear99293 -> RE: New 2D Counter Mod (WIP) (4/18/2021 3:36:46 AM)

Can someone please tell me how to install this mod - I downloaded game direct from Matrix - there is no install info - not that I find searching their
website, Slitherine's website or just google - get nothing at all



fluidwill matrix -> RE: Iron Cross 2D Counter & Map Mod Released (11/19/2021 3:05:04 PM)

Just wanted to say thanks very much for all your work. Appreciated.[&o]



Page: <<   < prev  5 6 7 [8] 9   next >   >>

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
0.75