Matrix Games Forums

 Forums  Register  Login  Photo Gallery  Member List  Search  Calendars  FAQ 

My Profile  Inbox  Address Book  My Subscription  My Forums  Log Out

setting a specific hex for LRCAP?

 
View related threads: (in this forum | in all forums)

Logged in as: Guest
Users viewing this topic: none
  Printable Version
All Forums >> [New Releases from Matrix Games] >> War in the Pacific: Admiral's Edition >> setting a specific hex for LRCAP? Page: [1]
Login
Message << Older Topic   Newer Topic >>
setting a specific hex for LRCAP? - 8/12/2010 4:49:35 PM   
kanibal

 

Posts: 19
Joined: 12/19/2006
Status: offline 		On page 153 of the manual it states:

"Long Range CAP may now be performed while normal CAP is flown. A new LRCAP level toggle is located just above the normal CAP level toggle. If you set a unit to LRCAP as primary mission, you may then split the units CAP duties between the unit’s base hex (CAP) and a nearby target hex (LRCAP)."

The manual implies that you choose which hex is going to be covered by your LRCAP.

I have two questions:

1. How or where do you designate which hex your LRCAP is supposed to protect?

2. Can you choose a non base hex as the target of your LRCAP responsibilities?

Thank You,

Kanibal

< Message edited by kanibal -- 8/12/2010 4:53:02 PM >
Post #: 1
RE: setting a specific hex for LRCAP? - 8/12/2010 5:26:13 PM   
Terminus


Posts: 41459
Joined: 4/23/2005
From: Denmark
Status: offline 		1. You set the target hex like you would set a target for an air strike.
2. Of course.

_____________________________

We are all dreams of the Giant Space Butterfly.

(in reply to kanibal)
Post #: 2
RE: setting a specific hex for LRCAP? - 8/12/2010 11:12:15 PM   
LeeChard

 

Posts: 1099
Joined: 9/12/2007
From: Michigan
Status: offline 		You can choose a task force that's in range too, very handy when you need to supply or reinforce a contested hex.

(in reply to kanibal)
Post #: 3
RE: setting a specific hex for LRCAP? - 8/12/2010 11:37:31 PM   
AcePylut


Posts: 1494
Joined: 3/19/2004
Status: offline 		Something fun to do is figure out where he's flying his transport aircraft (usually some nearly out of supply or surrounded concentration of troops), and LRCAP it. You'll get tons of kills as your fighters tag those old low and slow transports!

_____________________________


(in reply to LeeChard)
Post #: 4
RE: setting a specific hex for LRCAP? - 8/12/2010 11:57:04 PM   
LeeChard

 

Posts: 1099
Joined: 9/12/2007
From: Michigan
Status: offline 		Never thought of that, Acepylot. Good Idea!

(in reply to AcePylut)
Post #: 5
RE: setting a specific hex for LRCAP? - 8/13/2010 7:09:25 PM   
kanibal

 

Posts: 19
Joined: 12/19/2006
Status: offline
quote:

ORIGINAL: Terminus

1. You set the target hex like you would set a target for an air strike.
2. Of course.


Is the primary mission set to escort, sweep or does it matter?


(in reply to Terminus)
Post #: 6
RE: setting a specific hex for LRCAP? - 8/13/2010 10:07:23 PM   
geiramk

 

Posts: 20
Joined: 7/28/2009
Status: offline
quote:

ORIGINAL: Ranger5355

You can choose a task force that's in range too, very handy when you need to supply or reinforce a contested hex.


Problem is you can't designate such a task force that is just out of range, but will come in range of LRCAP during the execution of the next turn (as far as I can tell at least), so my ships get sunk anyway just as they are approacing a base with a heavy fighter presence...

(in reply to LeeChard)
Post #: 7
RE: setting a specific hex for LRCAP? - 8/14/2010 12:55:38 AM   
Lrfss


Posts: 349
Joined: 5/20/2002
From: Spring, TX
Status: offline
quote:

ORIGINAL: Saltcreep


quote:

ORIGINAL: Ranger5355

You can choose a task force that's in range too, very handy when you need to supply or reinforce a contested hex.


Problem is you can't designate such a task force that is just out of range, but will come in range of LRCAP during the execution of the next turn (as far as I can tell at least), so my ships get sunk anyway just as they are approacing a base with a heavy fighter presence...


I seem to recall being able to designate "out of range TF's" and do it often now, maybe it was an earlier version that you could not as I seem to recall? Maybe there is a range limit on just how far out of range? Farthest I have designated out of range IIRC was like maybe 3 or 4 hexs.

(in reply to geiramk)
Post #: 8
RE: setting a specific hex for LRCAP? - 8/14/2010 9:32:39 AM   
geiramk

 

Posts: 20
Joined: 7/28/2009
Status: offline
quote:

ORIGINAL: Lrfss

I seem to recall being able to designate "out of range TF's" and do it often now, maybe it was an earlier version that you could not as I seem to recall? Maybe there is a range limit on just how far out of range? Farthest I have designated out of range IIRC was like maybe 3 or 4 hexs.


OK, thanks for info. Must update my game version I think... Trouble is I still haven't finished playing the first game started just after release of WITPAE, and haven't wanted to introduce changes in the middle of an ongoing game, so I've been playing on version 1.00.

(in reply to Lrfss)
Post #: 9
RE: setting a specific hex for LRCAP? - 8/14/2010 2:12:51 PM   
VSWG


Posts: 3432
Joined: 5/31/2006
From: Germany
Status: offline 		Patch now!!  There shouldn't be any problem, but if you want to be sure just copy your entire AE folder to another location before patching as a backup.

_____________________________


(in reply to geiramk)
Post #: 10
RE: setting a specific hex for LRCAP? - 8/14/2010 2:13:44 PM   
VSWG


Posts: 3432
Joined: 5/31/2006
From: Germany
Status: offline 		BTW, LRCAP'ing a TF that is out of range during the orders phase works fine, and was possible in all versions of WitP.

_____________________________


(in reply to VSWG)
Post #: 11
RE: setting a specific hex for LRCAP? - 8/17/2010 4:40:09 PM   
kanibal

 

Posts: 19
Joined: 12/19/2006
Status: offline 		Can someone clarify what the primary mission selection is when attempting to use LRCAP in a designated hex or to protect a designated TF? I know how to select a target. My confusion is with regard to which mission type will not interfere with your LRCAP needs?

Kanibal

< Message edited by kanibal -- 8/17/2010 4:42:06 PM >

(in reply to VSWG)
Post #: 12
RE: setting a specific hex for LRCAP? - 8/17/2010 6:39:18 PM   
AcePylut


Posts: 1494
Joined: 3/19/2004
Status: offline 		Whatever percentage you don't set to LRCAP (or Rest) will fly the primary mission you've selected.

For example, if you select "Escort" at 10k feet, then click on 20% LRCAP with a destination, 20% of your planes will LRCAP the destination, the other 80% will attempt to fly escort for any air strike.

If you select Escort, 100% LRCAP, Destination hex.... 100% of your planes will LRCAP the destination hex.

If you select Sweep, 50% LRCAP, 30% Training, 10% Rest.... 50% will LRCap, 30% will train, 10% will rest, and the remaining 10% will sweep the destination hex (which would also be the hex you LRCAP if you selected a destination hex). Change the sweep to escort, and that 10% would attempt to fly escort.

AFAIK !!!!!

Of course, this assumes that every aircraft passes it's "fly" check. If it doesn't than you may not have a full "50%" or what have you actually LRCAP something (or whatever).

_____________________________


(in reply to kanibal)
Post #: 13
Page:   [1]
All Forums >> [New Releases from Matrix Games] >> War in the Pacific: Admiral's Edition >> setting a specific hex for LRCAP? Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts


Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

1.188